[1] 杨丽, 颜丙新, 张东兴, 等. 玉米精密播种技术研究进展[J]. 农业机械学报, 2016, 47(11): 38-48.
Yang Li, Yan Bingxin, Zhang Dongxing, et al. Researchprogress on precision planting technology of maize[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(11): 38-48.
[2] 韩中东, 刘江涛, 杨志杰, 等. 玉米精量播种复合作业机具设计及试验[J]. 中国农机化学报, 2024, 45(8): 20-26.
Han Zhongdong, Liu Jiangtao, Yang Zhijie, et al. Design and experiment of compound operation machine for precision sowing of maize [J]. Journal of Chinese Agricultural Mechanization, 2024, 45(8): 20-26.
[3] 李东洋, 金厚熙, 雷德超, 等. 国内气力式玉米精量排种器研究进展[J]. 现代农业科技, 2023, (16): 136-138.Li Dongyang, Jin Houxi, Lei Dechao, et al. Research progress on pneumatic corn precision seedmetering device in China[J]. Modern Agricultural Sciences and Technology, 2023, (16): 136-138.
[4] 徐峰, 张黎骅, 彭俊明, 等. 大豆玉米带状复合种植全程机械化专用机具研制现状与趋势[J]. 中国农机化学报, 2023, 44(1): 1-8.
Xu Feng, Zhang Lihua, Peng Junming, et al. Development status and trend of special machine for soybean and corn strip compound planting [J]. Journal of Chinese Agricultural Mechanization, 2023, 44(1): 1-8.
[5] 李玉环, 杨丽, 张东兴, 等. 气吸式玉米高速精量排种器投种性能分析与结构优化[J]. 农业工程学报, 2022, 38(8): 1-11.
Li Yuhuan, Yang Li, Zhang Dongxing, et al. Performance analysis and structure optimization of the maize precision metering device with air suction at highspeed condition [J]. Transactions of the Chinese Society of Agricultural Engineering, 2022, 38(8): 1-11.
[6] Yazgi A. Effect of seed tubes on corn planter performance [J]. Applied Engineering in Agriculture, 2016, 32(6): 783-790.
[7] Kocher M F, Coleman J M, Smith J A, et al. Corn seed spacing uniformity as affected by seed tube condition [J]. Applied Engineering in Agriculture, 2011, 27(2): 177-183.
[8] 尚增强, 张开飞, 杨东福, 等. 基于DEM—CFD耦合的气吸式大豆排种器种盘参数优化[J]. 中国农机化学报, 2023, 44(11): 1-8.
Shang Zengqiang, Zhang Kaifei, Yang Dongfu, et al. Simulation optimization of seed plate of air suction soybean seed metering device based on DEM—CFD coupling[J]. Journal of Chinese Agricultural Mechanization, 2023, 44(11):1-8.
[9] 张海晴, 陈逸飞, 乔平. 玉米精密播种机械的研究现状与发展趋势[J]. 南方农机, 2023, 54(24): 166-168.
[10] GB/T 20865—2017,免(少)耕施肥播种机[S].
[11] 贾珍珍. 玉米垄作侧深施肥开沟器的设计改进[J]. 农业科技与装备, 2024(1): 65-66.Improvement of thedesign of furrow opener for deep fertilization on the side of corn ridge tillage[J]. Agricultural Technology and equipment, 2024(1): 65-66.
[12] 浩斯巴雅尔. 气吸式免耕播种机开沟器结构分析与性能研究[D]. 呼和浩特: 内蒙古农业大学, 2013.
[13] 洪露, 郭庆, 邓钢. 玉米播种机排种器对精量播种质量的影响[J]. 农机质量与监督, 2021(9): 14-15.
[14] 蒋天养. 玉米种植机械化技术应用[J]. 种子科技, 2023, 41(23): 139-141.
[15] 张彩霞, 李小帅, 李飞翔, 等. 玉米勺轮式排种器的结构设计与仿真分析[J]. 拖拉机与农用运输车, 2023, 50(4): 38-41.
Zhang Caixia, Li Xiaoshuai, Li Feixiang, et al. Structure design and simulation analysis of corn scoopwheel seed metering device [J]. Tractor & Farm Transporter, 2023, 50(4): 38-41.
[16] 郭文骐, 张文毅, 祁兵, 等. 气力式高速精量排种器研究现状及展望[J]. 中国农机化学报, 2024, 45(3): 31-37.
Guo Wenqi, Zhang Wenyi, Qi Bing, et al. Research status and prospects of pneumatic high speed precision seeder[J]. Journal of Chinese Agricultural Mechanization, 2024, 45(3): 31-37.
[17] 陈继国, 衣淑娟, 刘凌峻, 等. 玉米精量播种机单体仿形机构的仿真与设计[J]. 黑龙江八一农垦大学学报, 2022, 34(3): 105-111.
Chen Jiguo,Yi Shujuan,Liu Lingjun, et al. Simulation and design of four rod profiling mechanism for maize precise seeder [J]. Journal of Heilongjiang Bayi Agricultural University, 2022, 34(3): 105-111.
[18] 王宇杰. 玉米大垄双行旋耕施肥播种机的整机设计与试验[D]. 哈尔滨: 东北农业大学, 2020.
[19] 耿元乐, 钟晓康, 王宪良, 等. 免耕播种机镇压力精准调控研究[J]. 中国农机化学报, 2022, 43(10): 141-148.
Geng Yuanle, Zhong Xiaokang, Wang Xianliang, et al. Research on precise regulation of no tillage seeder compaction pressure[J]. Journal of Chinese Agricultural Mechanization, 2022, 43(10): 141-148.
[20] 马姝岑. 提高大豆玉米机械化播种质量的调研——以黑龙江省抚远市为例[J]. 农机科技推广, 2023(9): 56-57.
|