Research status and prospects of seeder monitoring system technology

doi:10.13733/j.jcam.issn.2095-5553.2023.06.023

Abstract

Abstract: In order to address practical production problems of missing sowing, overseeding, and poor sowing uniformity, this study analyzes the current state of agricultural sensor accuracy, compatibility, antiinterference capabilities, and intelligent levels in Chinas planter monitoring systems. The goal is to improve the efficiency and accuracy of the planters operations, promote the intelligent development of planters, and upgrade the technical monitoring system. This paper analyzes the significance of applying the monitoring system technology to planters and expounds on the research status and application of the seeder monitoring system technology domestically and internationally. The working principle and specific classification of the controller, humancomputer interface, sensor, and signal transmission are introduced in detail. This paper points out the existing problems in Chinas planter monitoring system, such as the seed metering device driving mode, signal transmission mode, independent sensor research and development ability, seeder intelligence, and application and promotion cost. The paper provides a prospect for the future intelligent development of seeder monitoring system technology in order to provide a reference for the related research of seeder monitoring system technology in our country.

Key words: seeder, monitoring system, intelligence, sensor detection

摘要： 为解决实际生产中种子漏播、重播以及播种均匀性差等问题，通过对现有播种机监控系统技术的研究，指出现阶段我国农用传感器精度与配套程度较低、抗干扰能力较弱、智能化水平较低的现状，旨在提高播种机作业效率和精度，促进播种机智能化发展,推动播种机监控系统技术提档升级。分析将监控系统技术应用到播种机上的重要意义，阐述国内外播种机监控系统技术的研究现状及应用情况，详细介绍控制器、人机交互界面、传感器、信号传输等的工作原理以及具体分类。指出我国现阶段播种机监控系统在排种器驱动方式、信号传输方式、传感器自主研发能力、播种机智能化、应用推广成本等方面存在的问题，对未来播种机监控系统技术智能化发展进行展望，以期为我国播种机监控系统技术的相关研究提供参考。

关键词: 播种机, 监控系统, 智能化, 传感检测

CLC Number:

Chen Jin, , Liu Yunqiang, , Wang Wei, Wang Lu, , Liu Lijing, . Research status and prospects of seeder monitoring system technology[J]. Journal of Chinese Agricultural Mechanization, 2023, 44(6): 161-167.

陈锦, 刘云强, 王威, 王璐, 刘立晶, . 播种机监控系统技术研究现状与展望[J]. 中国农机化学报, 2023, 44(6): 161-167.

References

［1］　
李明森, 赵新天. 我国排种器的研究现状及发展［J］. 吉林农业, 2018(8): 44.

［2］　
王泉玉, 徐琪蒙, 卢彩云, 等. 免耕播种智能化关键技术研究现状与发展［J］. 华南农业大学学报, 2021, 42(6): 27-35.

Wang Quanyu, Xu Qimeng, Lu Caiyun， et al, Research status and development of key technologies for notillage seeding intellectualization ［J］. Journal of South China Agricultural University, 2021, 42(6): 27-35.

［3］　
苑严伟, 白慧娟, 方宪法, 等. 玉米播种与测控技术研究进展［J］. 农业机械学报, 2018, 49(9): 1-18.

Yuan Yanwei, Bai Huijuan, Fang Xianfa, et al, Research progress on maize seeding and its measurement and control technology ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2021, 49(9): 27-35.

［4］　
孙全芳, 戴玉华, 刘东利. 精密播种机监控系统的研究现状与发展趋势［J］. 山东机械, 2005(4): 60-62.

Sun Quanfang, Dai Yuhua, Liu Dongli. Research actualities and development trend on monitoring system of precision seeder ［J］. Shandong Machinery, 2005(4): 60-62.

［5］　
Karimi H, Navid H, Mahmoudi A. Online laboratory evaluation of seedingmachine application by an acoustic technique ［J］. Spanish Journal of Agricultural Research, 2015, 13(1).

［6］　
Karimi H, Navid H, Besharati B, et al. A practical approach to comparative design of noncontact sensing techniques for seed flow rate detection ［J］. Computers and Electronics in Agriculture, 2017, 142: 165-172.

［7］　
Taghinezhad J, Alimardani R, Jafary A. Design a capacitive sensor for rapid monitoring of seed rate of sugarcane planter ［J］. Agricultural Engineering International: CIGR Journal, 2013, 15(4): 23-29.

［8］　
Mander G, Arora M. Design of capacitive sensor for monitoring moisture content of soil and analysis of analog voltage with variability in moisture ［C］. 2014 Recent Advances in Engineering and Computational Sciences (RAECS). IEEE, 2014: 1-5.

［9］　
Nielsen S K, Nrremark M, Green O. Sensor and control for consistent seed drill coulter depth ［J］. Computers and Electronics in Agriculture, 2016, 127: 690-698.

［10］　
Leemans V, Destain M F. A computervision based precision seed drill guidance assistance ［J］. Computers and Electronics in Agriculture, 2007, 59(1-2): 1-12.

［11］　
丁友强, 杨丽, 张东兴, 等. 基于GPS测速的电驱式玉米精量播种机控制系统［J］. 农业机械学报, 2018, 49(8): 42-49.

Ding Youqiang, Yang Li, Zhang Dongxing, et al. Control system of motordriving maize precision planter based on GPS speed measurement ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2018, 49(8): 42-49.

［12］　
纪朝凤, 刘刚, 周建军, 等. 基于CAN总线的农业车辆自动导航控制系统［J］. 农业机械学报, 2009, 40(S1): 28-32.

Ji Chaofeng, Liu Gang, Zhou Jianjun, et al. Automatic guidance system of agricultural vehicles based on CAN Bus ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(S1): 28-32.

［13］　
尚书旗, 吴秀丰, 杨然兵, 等. 小区育种播种装备与技术研究现状与展望［J］. 农业机械学报, 2021, 52(2): 1-20.

Shang Shuqi, Wu Xiufeng, Yang Ranbing, et al. Research status and prospect of plotsowing equipment and technology ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2021, 52(2): 1-20.

［14］　
雷小龙, 张磊, 杨宏, 等. 油菜精量集中排种器电驱控制系统设计与试验［J］. 安徽农业大学学报, 2020, 47(3): 472-479.

Lei Xiaolong, Zhang Lei, Yang Hong, et al. Design and experiment of electric drive control system of precision centralized metering device for rapeseed ［J］. Journal of Anhui Agricultural University, 2020, 47(3): 472-479.

［15］　
杨硕, 王秀, 高原源, 等. 电动机驱动玉米气吸排种器总线控制系统设计与试验［J］. 农业机械学报, 2019, 50(2): 57-67.

Yang Shuo, Wang Xiu, Gao Yuanyuan, et al. Design and experiment of motor driving bus control system for corn vacuum seed meter ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(2): 57-67.

［16］　
丁友强, 刘彦伟, 杨丽, 等. 基于Android和CAN总线的玉米播种机监控系统研究［J］. 农业机械学报, 2019, 50(12): 33-41, 62.

Ding Youqiang, Liu Yanwei, Yang Li, et al. Monitoring system of maize precision planter based on Android and CAN Bus ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(12): 33-41, 62.

［17］　
陈进, 徐亚, 李耀明, 等. 育秧播种机机械手监控系统设计与研究［J］. 中国农机化学报, 2016, 37(9): 159-162.

Chen Jin, Xu Ya, Li Yaoming, et al. Design and research on monitoring system of seedling planter manipulator ［J］. Journal of Chinese Agricultural Mechanization, 2016, 37(9): 159-162.

［18］　
张伏, 陈天华, 陈建, 等. 基于MCGS的播种施肥控制系统设计与仿真［J］. 河北农业大学学报, 2019, 42(4): 117-121.

Zhang Fu, Chen Tianhua, Chen Jian, et al.Design and simulation of seeding and fertilizing control system based on MCGS ［J］. Journal of Agricultural University of Hebei, 2019, 42(4): 117-121.

［19］　
高原源, 王秀, 杨硕, 等. 基于CAN总线的播种深度监测评价系统研究［J］. 农业机械学报, 2019, 50(12): 23-32.

Gao Yuanyuan, Wang Xiu, Yang Shuo, et al. Development of CAN-based sowing depth monitoring and evaluation system ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(12): 23-32.

［20］　
白慧娟, 方宪法, 王德成, 等. 玉米播种机播深和压实度综合控制系统设计与试验［J］. 农业机械学报, 2020, 51(9): 61-72.

Bai Huijuan, Fang Xianfa, Wang Decheng, et al. Design and test of control system for seeding depth and compaction of corn precision planter ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2020, 51(9): 61-72.

［21］　
高原源, 翟长远, 杨硕, 等. 精密播种机下压力和播深CAN总线监控与评价系统研究［J］. 农业机械学报, 2020, 51(6): 15-28.

Gao Yuanyuan, Zhai Changyuan, Yang Shuo, et al. Development of CAN-based downforce and sowing depth monitoring and evaluation system for precision planter ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2020, 51(6): 15-28.

［22］　
靳晓波. 基于单片机控制的谷子精量播种控制系统设计［J］. 机械工程与自动化, 2019, 215(4): 197-198, 201.

Jin Xiaobo. Design of millet precision seeding control system based on single chip microcomputer control ［J］. Mechanical Engineering & Automation, 2019, 215(4): 197-198, 201.

［23］　
蒋春燕. 玉米精密播种机智能控制系统的研究［D］. 淄博: 山东理工大学, 2015.

Jiang Chunyan. Study on intelligent control system for corn precision seeder ［D］. Zibo: Shandong University of Technology, 2015.

［24］　
张春岭, 吴荣, 陈黎卿. 电控玉米排种系统设计与试验［J］. 农业机械学报, 2017, 48(2): 51-59.

Zhang Chunling, Wu Rong, Chen Liqing. Design and test of electronic control seeding system for maize ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2017, 48(2): 51-59.

［25］　
杨程, 臧英, 周志艳, 等. 基于PID算法的气力式施肥机变量施肥控制系统设计与试验［J］. 沈阳农业大学学报, 2017, 48(3): 320-327.

Yang Cheng, Zang Ying, Zhou Zhiyan, et al. Design and test of pneumatic fertilizer applicator variable ratio fertilization control system based on PID algorithm ［J］. Journal of Shenyang Agricultural University, 2017, 48(3): 320-327.

［26］　
陶建平. 智能化农业机械装备的研究进展分析［J］. 南方农机, 2018, 49(7): 8.

［27］　
黄敏. 智能化农业机械的研究进展［J］. 山西农经, 2019(3): 117.

［28］　
苑严伟, 张小超, 吴才聪, 等. 玉米免耕播种施肥机精准作业监控系统［J］. 农业工程学报, 2011, 27(8): 222-226.

Yuan Yanwei, Zhang Xiaochao, Wu Caicong, et al. Precision control system of notill corn planter ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2011, 27(8): 222-226.

［29］　
丁幼春, 何志博, 夏中州, 等. 小型履带式油菜播种机导航免疫PID控制器设计［J］. 农业工程学报, 2019, 35(7): 12-20.

Ding Youchun, He Zhibo, Xia Zhongzhou, et al. Design of navigation immune controller of small crawlertype rape seeder ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2019, 35(7): 12-20.

［30］　
黄小珊. 玉米免耕播种机排种器振动特性研究［D］. 长春: 吉林农业大学, 2018.

Huang Xiaoshan. Research on the vibration characteristics of seeding apparatus for corn notillage planter ［D］. Changchun: Jilin Agricultural University, 2018.

［31］　
高原源, 翟长远, 杨硕, 等. 播种单体对地下压力测量方法和数学模型［J］. 农业工程学报, 2020, 36(5): 1-9.

Gao Yuanyuan, Zhai Changyuan, Yang Shuo, et al. Measurement method and mathematical model for the seeding downforce of planter row unit ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2020, 36(5): 1-9.

[1]	Zhang Xuanxuan, Tan Yu, Zhang Lina, Jiang Yiyu, Zhang Ran. Monitoring system for scoopwheel maize metering performance based on motor direct driving [J]. Journal of Chinese Agricultural Mechanization, 2023, 44(8): 155-161.
[2]	Chen Weimei, Liu Xinwei, Wang Tiewei, Xu Wenkai, Li Juan. Recognition of pine wilt disease based on twolevel fusion deep learning [J]. Journal of Chinese Agricultural Mechanization, 2023, 44(7): 214-219.
[3]	Sun Xinping, , Li Hua, , Qi Xindan, Zhang Xu, , Chen Xi, , Wang Yongjian, . Design and experiment of air suction ditching device for Chinese cabbage seeder [J]. Journal of Chinese Agricultural Mechanization, 2023, 44(4): 17-24.
[4]	Xu Huiqun, Li Yang, Zhang Jianjun.. Research status on fruit characteristics of winter jujube and mechanized harvesting [J]. Journal of Chinese Agricultural Mechanization, 2023, 44(2): 53-59.
[5]	Zhang Xiaochen, Zhang Shuge, Cheng Shengnan, Xu Feng, Zhang Jianjun.. Technical requirements for field demonstration and verification of special seeder for soybean and corn strip compound planting [J]. Journal of Chinese Agricultural Mechanization, 2023, 44(1): 9-13.
[6]	Wu Yukang, Xue Jinlin, Gao Huisong, Sun Xingzhao, Zhang Bujun, Cheng Cheng.. Design of a 2BSQF-6 seeder with rotary tillage, ridging and fertilization for soybean and corn strip compound planting [J]. Journal of Chinese Agricultural Mechanization, 2023, 44(1): 25-30.
[7]	Li Bo, Jiang Zhaohui, Hong Shilan, Rao Yuan, Zhang Wu. . Tea leaf diseases recognition based on edge intelligence [J]. Journal of Chinese Agricultural Mechanization, 2022, 43(6): 175-180.
[8]	Zhu Feiyu, Liu Muhua, Yuan Haichao, Zhao Jinhui, Yu Haojun. . Design of soil temperature and moisture monitoring system for vegetable field based on the Internet of Things [J]. Journal of Chinese Agricultural Mechanization, 2022, 43(6): 190-198.
[9]	Ouyang An, Fan Chenlong, Zhao Huihui, Dong Jiaqi, Jiao Yuxuan. . Present status and equipment research progress of maize full mechanized production [J]. Journal of Chinese Agricultural Mechanization, 2022, 43(6): 207-214.
[10]	Han Changjie, Han Hongfei, You Jia, Rui Xue, Zhang Jing, Gao Jie.. Research and design of operation information monitoring system for automatic transplanter [J]. Journal of Chinese Agricultural Mechanization, 2022, 43(4): 60-65.
[11]	Wei Hongling, Wang Xiaoyu, Chen Jinxi, Cui Rongjiang. . Discussion on the present situation and development of mechanized garlic production in China [J]. Journal of Chinese Agricultural Mechanization, 2022, 43(4): 175-182.
[12]	Yang Changmin, Yi Wenyu, Qiu Yunqiao, Zhao Bangtai, Cheng Fangping, Chen Chang.. Research status and development analysis of seedraising precision seeder [J]. Journal of Chinese Agricultural Mechanization, 2022, 43(4): 183-188.
[13]	Chen Qi, Chen Cifa, Deng Xiangwu, Yuan Danfei.. Research on weed classification method based on mobile lightweight model [J]. Journal of Chinese Agricultural Mechanization, 2022, 43(2): 163-170.
[14]	Chen Shufa, Feng Bo, Lu Xinchun, Niu Yanrui, Zhang Haifeng. Research progress and prospect of intelligent electronic control precision seeding technology [J]. Journal of Chinese Agricultural Mechanization, 2022, 43(12): 5-12.
[15]	Wang Jing, Fan Xiaofei, Zhao Zhihui, Zhang Jun, Sun Lei, Suo Xuesong. . Maturity identification of different jujube varieties under natural environment based on YOLO algorithm [J]. Journal of Chinese Agricultural Mechanization, 2022, 43(11): 165-171.