[1] 邓尾. 高效型菠萝苗种植机[P]. 中国专利: 201310396567. 0, 2013-03-15.
[2] 菠萝移栽机[EB/OL]. http: //www. yzjzg. com/Prod ucts/blyzj. html, 2013-01-01.
[3] 薛忠, 陈如约, 张秀梅. 国内外菠萝机械化种植收获研究现状[J]. 山西农业大学学报(自然科学版), 2021, 41(3): 110-120.
Xue Zhong, Chen Ruyue, Zhang Xiumei. Frontier of pineapple planting and harvesting mechanization in the world [J]. Journal of Shanxi Agricultural University (Natural Sciences), 2021, 41(3): 110-120.
[4] 徐高伟. 大垄膜上交错双行丹参移栽机关键部件研究及整机设计[D]. 哈尔滨: 东北农业大学, 2019.
Xu Gaowei. Key components research and design of doublerow crossing salvia miltiorrhiza transplanter on mulchfilm of big ridge [D]. Harbin: Northeast Agricultural University, 2019.
[5] 黄闪闪. 膜上移栽机覆土系统设计及试验研究[D]. 杨凌: 西北农林科技大学, 2016.
Huang Shanshan. Design and experimental study on the soil covering system of the upfilm transplanting machine [D]. Yangling: Northwest A & F University, 2016.
[6] 杨文彪. 烟苗膜上移栽机关键部件的研究与开发[D]. 昆明: 昆明理工大学, 2019.
Yang Wenbiao. Research and development of key components of tobacco seedling transplanting machine [D]. Kunming: Kunming University of Science and Technology, 2019.
[7] 金鑫, 杜新武, 杨传华, 等. 移栽机曲柄滑槽式栽植机构设计与试验[J]. 农业机械学报, 2016, 47(5): 83-90.
Jin Xin, Du Xinwu, Yang Chuanhua, et al. Design and experiment on crankchute planting mechanism of transplanting machine [J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(5): 83-90.
[8] 薛忠, 赵亮, 王凤花, 等. 基于离散元法的螺旋式排肥器性能模拟试验[J]. 湖南农业大学学报(自然科学版), 2019, 45(5): 548-553.
Xue Zhong, Zhao Liang, Wang Fenghua, et al. Performance simulation test of the spiral fertilizer distributor based on discrete element method [J]. Journal of Hunan Agricultural University (Natural Sciences), 2019, 45(5): 548-553.
[9] 吴海平, 郑德聪, 王玉顺, 等. 1GNF-200施肥旋耕机的设计与研究[J]. 山西农业大学学报, 1999, 19(2): 143-146.
Wu Haiping, Zheng Decong, Wang Yushun, et al. Design and study of 1GNF-200 rotary tiller with fertilizing [J]. Journal of Shanxi Agricultural University (Natural Sciences), 1999, 19(2): 143-146.
[10] 李宝筏. 农业机械学[M]. 北京: 中国农业出版社, 2005.
[11] 农业机械化科学研究院. 农业机械设计手册[M]. 北京: 中国农业科学出版社, 2007.
[12] 姬江涛, 贾世通, 杜新武, 等. 1GZN-130V1型旋耕起垄机的设计与研究[J]. 中国农机化学报, 2016, 37(1): 1-4, 21.
Ji Jiangtao, Jia Shitong, Du Xinwu, et al. Design and promotion of 1GZN-130V1 rotary cultivation ridge [J]. Journal of Chinese Agricultural mechanization, 2016, 37(1): 1-4, 21.
[13] 李宇飞, 胡军, 李庆达, 等. 1ZQ-440型起垄整形机的设计与试验研究[J]. 山西农业大学学报(自然科学版), 2018, 38(11): 48-53.
Li Yufei, Hu Jun, Li Qingda, et al. Design and experimental study of 1ZQ-440 ridging and shaping machine [J]. Journal of Shanxi Agricultural University (Natural Sciences), 2018, 38(11): 48-53.
[14] 邵园园, 刘艺, 玄冠涛, 等. 多功能鸭嘴式蔬菜移栽机设计与仿真分析[J]. 中国农机化学报, 2019, 40(11): 9-12, 34.
Shao Yuanyuan, Liu Yi, Xuan Guantao, et al. Design and simulation analysis of multifunction duckbill type vegetable transplant [J]. Journal of Chinese Agricultural mechanization, 2019, 40(11): 9-12, 34.
[15] 韩绿化, 毛罕平, 严蕾, 等. 穴盘育苗移栽机两指四针钳夹式取苗末端执行器[J]. 农业机械学报, 2015, 46(7): 23-30.
Han Lühua, Mao Hanping, Yan Lei, et al. Pincettetype endeffector using two fingers and four pins for picking up seedings [J]. Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(7): 23-30.
|