蓖麻植株力学特性试验研究

doi:10.13733/j.jcam.issn.2095-5553.2023.02.003

摘要/Abstract

摘要： 为研究蓖麻力学条件，对蓖麻的果—柄接点、茎—柄接点和茎秆不同生长部位的抗拉特性、抗弯特性进行力学测试。结果表明：成熟期果—柄抗拉力和抗拉强度分别为3.31～6.74 N、3.48～8.31 MPa，收获期果—柄抗拉力和抗拉强度分别为1.90～4.15 N、2.42～5.28 MPa；茎—柄抗拉力和抗拉强度分别为15.78～37.07 N、19.70～3466 MPa；茎秆的抗拉力、弹性模量和抗拉强度分别为56.99～130.42 N、160.99～203.80 MPa、2850～65.21 MPa，茎秆的抗弯力、弯曲截面模量和抗弯强度分别为15.20～91.04 N、31.53～173.07 MPa、19.27～21.04 MPa。分析试验结果可知，果—柄连结强度与茎—柄连结强度、茎秆抗拉强度及抗弯强度之间存在显著性差异，证明在采摘过程中蓖麻果—柄接点更易分离，其次是茎—柄接点，通过合理设计采摘部件工作参数，可以实现只采收蓖麻蒴果，而较少破坏茎秆。

关键词: 蓖麻, 果柄, 茎秆, 力学特性

Abstract: In order to testify the mechanical condition of harvesting castor, the tensile properties and bending properties of capsulepeduncle node, stempeduncle node and different growing parts of stem were tested. The results showed that the tensile force and tensile strength of capsulepeduncle node were 3.31-6.74 N and 3.48-8.31 MPa at ripening stage, 190-4.15 N and 2.42-5.28 MPa at harvesting stage. The tensile force and tensile strength of stempeduncle node were 15.78-37.07 N and 19.70-34.66 MPa. The tensile force, elastic modulus and tensile strength of stem bark were 56.99-130.42 N, 160.99-203.80 MPa and 28.50-65.21 MPa. The bending force, bending section modulus and bending strength of stem were 15.20-91.04 N, 31.53-173.07 MPa and 19.27-21.04 MPa. The analysis results indicated that there were significant differences between the connection strength of capsulepeduncle node, connection strength of stempeduncle node, stem tensile strength and stem bending strength, which proved that capsulepeduncle node was easiest to fracture in the process of picking, followed by stempeduncle node. By reasonably designing the working parameters of picking parts, the harvester can just pick the castor capsule without destroying the stem.

Key words: castor, peduncle, stem, mechanical properties

中图分类号:

S225.99

刘磊, 石磊, 孔凡婷, 吴腾, 陈长林, 孙勇飞. 蓖麻植株力学特性试验研究[J]. 中国农机化学报, 2023, 44(2): 14-19.

Liu Lei, Shi Lei, Kong Fanting, Wu Teng, Chen Changlin, Sun Yongfei. Experimental research on mechanical properties of castor plants[J]. Journal of Chinese Agricultural Mechanization, 2023, 44(2): 14-19.

参考文献

［1］　
孙振钧，吕丽媛，伍玉鹏. 蓖麻产业发展：从种植到利用［J］. 中国农业大学学报， 2012， 17(6)： 204-214.

Sun Zhenjun, Lü Liyuan, Wu Yupeng. Castor industry development: From cultivation to product exploitation［J］. Journal of China Agricultural University, 2012, 17(6): 204-214.

［2］　
姚远，李凤山，陈永胜，等. 国内外蓖麻研究进展［J］. 内蒙古民族大学学报：自然科学版， 2009， 24(2)： 172-175.

Yao Yuan, Li Fengshan, Chen Yongsheng, et al. Research progress on castor［J］. Journal of Inner Mongolia University for Nationalities: Natural Sciences, 2009, 24(2): 172-175.

［3］　
王蔚萍, 缪翼, 刘元忠. 蓖麻: 土地里种出的“石油”［J］.吉林农业, 2014(14): 13.

［4］　
Severino L S, Auld D L, Baldanzi M, et al. A review on the challenges for increased production of castor［J］. Agronomy Journal, 2012, 104(4): 853-880.

［5］　
孔凡婷，吴腾，石磊，等. 蓖麻收获装备研究现状与展望［J］. 中国农机化学报， 2019， 40(1)： 32-36.

Kong Fanting, Wu Teng, Shi Lei, et al. Research status and development prospect of Ricinus communis harvester［J］. Journal of Chinese Agricultural Mechanization, 2019, 40(1): 32-36.

［6］　

Zhao Huayang, Zhang Chunyou. Analysis on the research status and structure characteristics of castor harvester ［C］. 2019 IEEE International Conference on Mechatronics and Automation (ICMA), IEEE, 2019: 415-420.

［7］　
Lyon C, Barbe P. Selfpropelled harvester for harvesting delicate crops und as castoroil seeds ［P］. EP19940250172, 1998-04-22.

［8］　
李长河，刘承诚，庄文华，等. 梳齿式蓖麻采摘系统的设计与运动轨迹模拟［J］. 机械设计与制造， 2016(5)： 95-98.

Li Changhe, Liu Chengcheng, Zhuang Wenhua, et al. The structural design and motion simulation of the combtype castor picking system ［J］. Journal of Machinery Design & Manufacture, 2016(5): 95-98.

［9］　
吴腾, 孔凡婷, 石磊, 等. 蓖麻机械化生产技术发展现状探析［J］. 中国农机化学报, 2019, 40(10): 77-81.

Wu Teng, Kong Fanting, Shi Lei, et al. Analysis of the development status of Ricinus communis production technology［J］. Journal of Chinese Agricultural Mechanization, 2019, 40(10): 77-81.

［10］　
侯俊铭, 李金澎, 何涛, 等. 蓖麻蒴果力学特性试验及仿真研究［J］. 沈阳农业大学学报, 2018, 49(5): 574-583.

Hou Junming, Li Jinpeng, He Tao, et al. Experimental and finite element analysis of mechanical properties of castor fruit［J］. Journal of Shenyang Agricultural University, 2018, 49(5): 574-583.

［11］　
曹玉华, 李长友, 卿艳梅, 等. 蓖麻蒴果剥壳力学特性的试验［J］. 江苏大学学报（自然科学版）, 2009, 30(5): 446-449.

Cao Yuhua, Li Changyou, Qing Yanmei, et al. Test on mechanic characteristic of castor capsule hulling［J］. Journal of Jiangsu Uniwersity (Natinol Science Edition), 2009, 30(5): 446-449.

［12］　
曹玉华, 李长友, 卿艳梅, 等. 蓖麻蒴果力学特性的有限元分析［J］. 江苏大学学报（自然科学版）, 2010, 31(4): 383-387.

Cao Yuhua, Li Changyou, Qing Yanmei, et al. Finite element analysis on mechanical properties of castorcapsule［J］. Journal of Jiangsu Uniwersity (Natinol Science Edition), 2010, 31(4): 383-387.

［13］　
刘汝宽, 程鑫鑫, 肖志红, 等. 蓖麻蒴果剥壳过程中的力学性能有限元仿真［J］. 中国粮油学报, 2015, 30(5): 62-66.

Liu Rukuan, Cheng Xinxin, Xiao Zhihong, et al. Finite element simulation on mechanical property of castor capsule during husking ［J］. Journal of the Chinese Cereals and Oils Association, 2015, 30(5): 62-66.

［14］　
散鋆龙, 刘旋峰, 牛长河, 等. 杏果实成熟度特性参数与果柄分离力的相关性分析［J］. 农业工程学报, 2013, 29(23): 62-68.

San Yunlong, Liu Xuanfeng, Niu Changhe, et al. Relativity analysis between characteristic parameters of apricots ripeness and its fruit removal force［J］. Transactions of the Chinese Society of Agricultural Engineering, 2013, 29(23): 62-68.

［15］　
李红波, 薛晋霞, 王炳轩, 等. 谷子茎秆叶鞘叶片及其结合部位的拉伸力学性能［J］. 农业工程学报, 2020, 36(18): 11-17.

Li Hongbo, Xue Jinxia, Wang Bingxuan, et al. Tensile properties of foxtail millet leaf sheath, leaf and leaf collar ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2020, 36(18): 11-17.

［16］　
孙超, 张进龙, 杨宝玲, 等. 玉米果穗根部和穗柄拉伸力学特性测试［J］. 中国农机化学报, 2018, 39(6): 7-10.

Sun Chao, Zhang Jinlong, Yang Baoling, et al. Tensile test of ear base and ear stem ［J］. Journal of Chinese Agricultural Mechanization, 2018, 39(6): 7-10.

［17］　
杨然兵, 徐玉凤, 梁洁, 等. 花生机械收获中根、茎、果节点的力学试验与分析(英文)［J］. 农业工程学报, 2009, 25(9): 127-132.

Yang Ranbing, Xu Yufeng, Liang Jie, et al. Tests and analyses of mechanical properties of peanut root, stem and nut node in mechanical harvest ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2009, 25(9): 127-132.

［18］　
程鑫鑫. 蓖麻果实脱壳方法及滚搓式脱壳机的关键技术研究［D］. 长沙: 中南大学, 2013.

Cheng Xinxin. Study on shelling method of castor beans and key technology of rollingrubbing shelling machine ［D］. Changsha: Zhongnan University, 2013.

[1]	王涛, 闫小丽, 米国鹏, 刘溯源, 张振国, 刘正道. 硬质茎秆切割装置研究现状[J]. 中国农机化学报, 2023, 44(8): 34-39.
[2]	张祥辉, 孙群, 赵栋杰, 许亚辉. 葡萄嫁接苗木的切削特性研究[J]. 中国农机化学报, 2023, 44(5): 58-62.
[3]	王佳, 李绍波, 陈春皓, 李建平, 薛春林, 边永亮. 葡萄茎秆切割装置作业参数优化与试验[J]. 中国农机化学报, 2023, 44(2): 37-45.
[4]	徐日荣, 陈湘瑜, 陈昊, 张玉梅, 蓝新隆, 唐兆秀. 福建主栽花生品种果柄节点强度分析[J]. 中国农机化学报, 2022, 43(5): 22-28.
[5]	胡双燕, 胡敏娟, 张文毅, 蒋展. 辣椒穴盘苗茎秆力学特性试验与仿真研究[J]. 中国农机化学报, 2022, 43(3): 9-18.
[6]	余传佩, Ampazidis Yiannis. 推剪式樱桃采摘器设计与试验[J]. 中国农机化学报, 2022, 43(10): 7-11.
[7]	何勋, 吕严柳, 王万章, 周正, 何豪, 郭海钦. 不同含水率对油莎豆物理特性及力学特性的影响[J]. 中国农机化学报, 2022, 43(1): 80-85.
[8]	谢志平, 郎彦城, 陈璐琪, . 类球体果实生物力学特性研究综述[J]. 中国农机化学报, 2021, 42(9): 96-106.
[9]	孙延成;牟孝栋;王志伟;姜慧新;王志坚;耿端阳;. 构树收获机设计与试验[J]. 中国农机化学报, 2021, 42(7): 26-32+75.
[10]	夏鼎宽;邓干然;何冯光;郑爽;李玲;覃双眉;. 木薯茎秆粉碎还田机刀片离地间隙控制系统设计与仿真分析[J]. 中国农机化学报, 2021, 42(7): 62-68.
[11]	李洋;王敏;温宝琴;李景彬;李利桥;坎杂;. 基于灰色关联理论的甘草茎秆力学特性试验研究[J]. 中国农机化学报, 2021, 42(6): 72-78.
[12]	马志艳;张徐康;杨光友;. 基于改进Mask R-CNN的水稻茎秆杂质分割方法研究[J]. 中国农机化学报, 2021, 42(6): 145-150.
[13]	贾生涛;牛长河;王学农;石鑫;杨会民;刘旋峰;. 新疆大蒜物料及力学特性试验研究[J]. 中国农机化学报, 2021, 42(5): 81-86.
[14]	李玲;邓干然;李国杰;郑爽;崔振德;. 高良姜须根剪切力学特性试验研究[J]. 中国农机化学报, 2020, 41(8): 116-120.
[15]	赵晨阳;郭俊先;刘娜;王彦;. 和田地区适宜机械化移栽的辣椒穴盘苗研究[J]. 中国农机化学报, 2020, 41(7): 40-45.