基于EDEM烟草营养土参数标定

doi:10.13733/j.jcam.issn.2095-5553.2024.07.022

摘要/Abstract

摘要： 为获得准确的烟草营养土离散元参数，采用仿真试验和台架试验相结合的方法，开展烟草营养土离散元仿真参数标定。以烟草营养土休止角为响应指标，采用Hertz-Mindli（no slip）离散元接触模型，设计Plackett-Burman试验，对烟草营养土离散元参数进行因素筛选，对烟草营养土休止角有显著性影响的因素分别为营养土间静摩擦系数、营养土间滚动摩擦系数和营养土—玻璃静摩擦系数；进行三因素三水平的Box-Behnken试验，获得各因素与烟草营养土休止角之间的回归方程。烟草营养土离散元模型参数标定结果为：静摩擦系数0.67、滚动摩擦系数0.35、营养土—玻璃静摩擦系数0.35。在标定所得的离散元模型下，仿真试验所得休止角与台架试验所得休止角值相对误差为2.59%。

关键词: 烟草营养土, EDEM, 休止角, 仿真标定

Abstract: In order to obtain the accurate discrete element parameters of tobacco nutrient soil, the simulation parameter calibration of tobacco nutrient soil discrete element was carried out by combining simulation test and bench test. Taking the Angle of repose of tobacco vegetative soil as the response index and the Hertz-Mindli (no slip) discrete element contact model was used to design the Plackett-Burman test, to screen the discrete element simulation parameters of tobacco vegetative soil. The factors that had significant influence on the resting Angle of tobacco vegetative soil were the static friction coefficient between vegetative soil, the rolling friction coefficient between vegetative soil and the static friction coefficient between vegetative soil and glass. In order to further obtain the optimal parameter combination of each factor, Box-Behnken experiment with three factors and three levels was designed, and the secondorder regression response model of the restangle parameters of tobacco vegetative soil was obtained. The results showed that the optimal parameter combination of discrete element model of tobacco nutrient soil was as follows: static friction coefficient of 0.67, rolling friction coefficient of 0.35, static friction coefficient of vegetative soil and glass of 0.35. Under the discrete element model obtained from calibration, the relative error of the resting Angle obtained by simulation test and bench test is 2.59%.

Key words: tobacco nutrient soil, EDEM, angle of repose, simulation calibration

中图分类号:

S223.9

邱志丹, 罗熙霖, 林志华, 常鹏飞, 陈龚, 杨文武. 基于EDEM烟草营养土参数标定[J]. 中国农机化学报, 2024, 45(7): 146-151.

Qiu Zhidan, Luo Xilin, Lin Zhihua, Chang Pengfei, Chen Gong, Yang Wenwu. Parameter calibration of tobacco nutrient soil based on EDEM[J]. Journal of Chinese Agricultural Mechanization, 2024, 45(7): 146-151.

参考文献

［1］　丁文波, 朱继平, 陈伟, 等. 基于EDEM的青稞接触参数仿真标定［J］. 中国农机化学报, 2021, 42(9): 114-121.
Ding Wenbo, Zhu Jiping, Chen Wei, et al. Simulation calibration of highland barley contract parameters base on EDEM ［J］. Journal of Chinese Agricultural Mechanization, 2021, 42(9): 114-121.
［2］　王国强, 郝万军, 王继新. 离散单元法及其在EDEM上的实践［M］. 西安: 西北工业大学出版社, 2010.
［3］　胡国明. 颗粒系统的离散元素法分析仿真［M］. 武汉: 武汉理工大学出版社, 2010.
［4］　贾富国, 韩燕龙, 刘扬, 等. 稻谷颗粒物料堆积角模拟预测方法［J］. 农业工程学报, 2014, 30(11): 254-260.Jia Fuguo, Han Yanlong, Liu Yang, et al. Simulation prediction method of repose angle for rice particle materials ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2014, 30(11): 254-260.
［5］　刘凡一, 张舰, 李博, 等. 基于堆积试验的小麦离散元参数分析及标定［J］. 农业工程学报, 2016, 32(12): 247-253.Liu Fanyi, Zhang Jian, Li Bo, et al. Calibration of parameters of wheat required in discrete element method simulation based on repose angle of particle heap ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2016, 32(12): 247-253.
［6］　王宪良, 胡红, 王庆杰, 等. 基于离散元的土壤模型参数标定方法［J］. 农业机械学报, 2017, 48(12): 78-85.Wang Xianliang, Hu Hong, Wang Qingjie, et al. Calibration method of soil contact characteristic parameters based on DEM theory ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2017, 48(12): 78-85.
［7］　袁全春, 徐丽明, 邢洁洁, 等. 机施有机肥散体颗粒离散元模型参数标定［J］. 农业工程学报, 2018, 34(18): 21-27.Yuan Quanchun, Xu Liming, Xing Jiejie, et al. Parameter calibration of discrete element model of organic fertilizer particles for mechanical fertilization ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2018, 34(18): 21-27.
［8］　戴飞, 宋学锋, 赵武云, 等. 全膜双垄沟覆膜土壤离散元接触参数仿真标定［J］. 农业机械学报, 2019, 50(2): 49-56, 77.Dai Fei, Song Xuefeng, Zhao Wuyun, et al. Simulative calibration on contact parameters of discrete elements for covering soil on whole plastic film mulching on double ridges ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(2): 49-56, 77.
［9］　于庆旭, 刘燕, 陈小兵, 等. 基于离散元的三七种子仿真参数标定与试验［J］. 农业机械学报, 2020, 51(2): 123-132.
Yu Qingxu, Liu Yan, Chen Xiaobing, et al. Calibration and experiment of simulation parameters for panax notoginseng seeds based on DEM ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2020, 51(2): 123-132.
［10］　王黎明, 范盛远, 程红胜, 等. 基于EDEM的猪粪接触参数标定［J］. 农业工程学报, 2020, 36(15): 95-102.
Wang Liming, Fan Shengyuan, Cheng Hongsheng, et al. Calibration of contact parameters for pig manure based on EDEM ［J］.Transactions of the Chinese Society of Agricultural Engineering, 2020, 36(15): 95-102.
［11］　Li B, Chen Y, Chen J. Modeling of soilclaw interaction using the discrete element method (DEM) ［J］. Soil and Tillage Research, 2016, 158: 177-185.
［12］　Miller A, Sitter R R. Choosing columns from the 12-run Plackett-Burman design ［J］. Statistics & Probability Letters, 2004, 67(2): 193-201.
［13］　李洪昌, 李耀明, 唐忠, 等. 基于EDEM的振动筛分数值模拟与分析［J］. 农业工程学报, 2011, 27(5): 117-121.Li Hongchang, Li Yaoming, Tang Zhong, et al. Numerical simulation and analysis of vibration screening based on EDEM ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2011, 27(5): 117-121.
［14］　Zaalouk A K, Zabady F I. Effect of moisture content on angle of repose and friction coefficient of wheat grain ［J］. Misr Journal of Agricultural Engineering, 2009, 26(1): 418-427.
［15］　石林榕, 赵武云, 孙伟. 基于离散元的西北旱区农田土壤颗粒接触模型和参数标定［J］. 农业工程学报, 2017, 33(21): 181-187.Shi Linrong, Zhao Wuyun, Sun Wei. Parameter calibration of soil particles contact model of farmland soil in northwest arid region based on discrete element method ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2017, 33(21): 181-187.
［16］　郝建军, 魏文波, 黄鹏程, 等. 油葵籽粒离散元参数标定与试验验证［J］. 农业工程学报, 2021, 37(12): 36-44.
Hao Jianjun, Wei Wenbo, Huang Pengcheng, et al. Calibration and experimental verification of discrete element parameters of oil sunflower seeds ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2021, 37(12): 36-44.
［17］　王宪良, 钟晓康, 耿元乐, 等. 基于离散元非线性弹塑性接触模型的免耕土壤参数标定［J］. 农业工程学报, 2021, 37(23): 100-107.
Wang Xianliang, Zhong Xiaokang, Geng Yuanle, et al. Construction and parameter calibration of the nonlinear elastoplastic discrete element model for notillage soil compaction ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2021, 37(23): 100-107.
［18］　武涛, 黄伟凤, 陈学深, 等. 考虑颗粒间黏结力的黏性土壤离散元模型参数标定［J］. 华南农业大学学报, 2017, 38(3): 93-98.Wu Tao, Huang Weifeng, Chen Xueshen, et al. Calibration of discrete element model parameters for cohesive soil considering the cohesion between particles ［J］. Journal of South China Agricultural University, 2017, 38(3): 93-98.
［19］　宋占华, 李浩, 闫银发, 等.桑园土壤非等径颗粒离散元仿真模型参数标定与试验［J］. 农业机械学报, 2022, 53(6): 21-33.
Song Zhanhua, Li Hao, Yan Yinfa, et al. Calibration method of contact characteristic parameters of soil in mulberry field based on unequaldiameter particles DEM theory ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2022, 53(6): 21-33.

[1]	冯锐, , 雷雪梅, 李林鑫, 赖永江, 粟超, 陶丹. 勺轮式蚕豆排种器设计与排种性能研究[J]. 中国农机化学报, 2024, 45(7): 15-21.
[2]	陈强, 钱孟波, 虞浪, 孙福兴, 潘佳煊. 基于EDEMFluent耦合仿真的射流式挖藕机设计与优化[J]. 中国农机化学报, 2024, 45(4): 18-22.
[3]	刘珂, 魏伟锋, , 朱纪跃, , 李高伟, 高震南. 田间机收元胡离散元模型参数标定与试验[J]. 中国农机化学报, 2024, 45(4): 32-38.
[4]	徐庄威, , 王士林, , 易中懿, , 潘健, , 吕晓兰, . 基于JKR模型的辣椒籽离散元参数标定[J]. 中国农机化学报, 2023, 44(9): 85-95.
[5]	孟华, 王茜, 李晓红, 李赫, 余永昌. 定扰动辅助充种大豆排种器设计与试验[J]. 中国农机化学报, 2023, 44(6): 18-25.
[6]	杨杰, 张征, 古冬冬, 王一言, 关阳, 仵峰. 杨杰, 张征, 古冬冬, 等. 秸秆收集机捡拾器仿真优化设计[J]. 中国农机化学报, 2023, 44(5): 1-9.
[7]	周鹏飞, 蒙贺伟, , , 梁荣庆, 张炳成, 坎杂, , . 基于OpenCV-Python的土壤颗粒动态休止角试验[J]. 中国农机化学报, 2023, 44(5): 214-222.
[8]	童世合, 邵明玺, 曹猛, 赵军杰. 基于DEM的玉米秸秆离散元模型参数标定[J]. 中国农机化学报, 2023, 44(2): 69-75.
[9]	王善博, 阿力木·买买提吐尔逊, , 黄强斌, 师邀兵, 李谦绪, 杜志高. 基于EDEMRecurDyn耦合的玉米剥皮装置仿真分析与试验[J]. 中国农机化学报, 2023, 44(10): 115-120.
[10]	殷慧子, 奚小波, 陈金楚, 张翔, 徐金, 张瑞宏, . 履带自走式双隧道喷雾机设计与试验[J]. 中国农机化学报, 2022, 43(9): 73-80.
[11]	李修银, 廖敏, 杨杰, 郑睿恺. 羌活籽粒和珍珠岩的离散元参数标定及排种验证[J]. 中国农机化学报, 2022, 43(8): 40-46.
[12]	聂传斌, 孙卫明, 张燕军, 李佳眙, 邢煜斌, 龚道清. 基于DEM仿真的种鹅精准饲喂装置设计优选研究[J]. 中国农机化学报, 2022, 43(6): 67-75.
[13]	赵立华, 程卫东, 刘洋, 叶阳. 绿茶杀青机茶叶颗粒运动学仿真分析[J]. 中国农机化学报, 2022, 43(6): 104-109.
[14]	张宝昌, 胡培杰, 陈为鹏, 邱田元, 杨善东. 宽苗带小麦免耕施肥播种机设计与试验[J]. 中国农机化学报, 2022, 43(2): 22-27.
[15]	仇义, 戴晓锋, 陈智, 杨秀芳, 方学良, 戴念祖. 基于EDEM的冰草种子丸化机工艺参数优化仿真与试验[J]. 中国农机化学报, 2022, 43(11): 69-74.