Research on dynamic
characteristics of tractor multi-way valve

Abstract

Abstract: As the core component of the tractor valve control system, the performance of the multi-way valve determines the operation quality of the tractor.In order to solve the problems of large leakage and large vortex area of some tractor multi-way valves, a tractor multi-way valve with U-semi-circular throttle groove is designed, and the dynamic characteristics of U-semicircular throttle trough tractor multi-way valve are studied through simulation experiments.The results showed that the outlet flow of U-semicircular throttle valve shows the characteristics of slow first, then fast and then slow. The steady-state flow rate of the outlet of the multi-way valve was 113 L/min, the flow change was stable without shock, and the control characteristics were good.The test scheme of U-semicircular throttle groove tractor multi-way valve was formulated, and it was concluded that the pressure difference at the valve port decreased with the increase of the displacement of the valve core, and the minimum pressure difference at the valve port was 1.2 MPa. The maximum leakage of the multi-way valve was 10.5 mL/min, which meets the leakage index.Therefore, it was verified that the flow change of the U-semicircular throttle channel multi-way valve was stable and the internal leakage was small.

Key words: , tractor, multi-way valve, U-semicircular throttling groove, dynamic characteristics, leakage

摘要： 多路阀作为拖拉机阀控系统的核心元件，其性能影响拖拉机及附加装置的作业质量。为优化部分拖拉机多路阀流量特性、减小压差等问题，设计一种具有U-半圆形节流槽结构的拖拉机多路阀，通过仿真试验研究U-半圆形节流槽拖拉机多路阀的动态特性。结果表明：U-半圆形节流槽出口流量呈现先小后大再小的特点。多路阀出口稳态流量为113 L/min，流量变化稳定无冲击，控制特性好。制定了U-半圆形节流槽拖拉机多路阀试验方案，通过试验得出阀口压差随着阀芯位移的增大而减小，阀口最小压差为1.2 MPa；测得多路阀最大泄漏量为10.5 mL/min，满足泄漏指标。从而验证了U-半圆形节流槽多路阀流量变化稳定，内泄漏量小。

关键词: 拖拉机, 多路阀, U-半圆形节流槽, 动态特性, 泄漏量

CLC Number:

S222：S223

Yang Junru, , Yu Xiaodong, Li Ruichuan, , Xu Jikang, , Han Zongran, Li Yanchao, . Research on dynamic characteristics of tractor multi-way valve[J]. Journal of Chinese Agricultural Mechanization.

杨俊茹, , 于小东, 李瑞川, , 徐继康, , 韩宗冉, 李艳超, . 拖拉机多路阀节流槽动态特性研究[J]. 中国农机化学报.

References

[1] Coskun G, Kolcuoglu T, Dogramacı T, et al. Analysis of a priority flow control valve with hydraulic system simulation model [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39: 1597-1605.

[2] Marko S, Niko H. Reduction of the flow forces in a small hydraulic seat valve as alternative approach to improve the valve characteristics [J]. Energy Conversion and Management, 2015, 89: 708-718.

[3] 周思聪, 张宏, 卢宇, 等. 多路阀结构设计与改进[J]. 液压与气动, 2022, 46(3): 38-44.

Zhou Sicong, Zhang Hong, Lu Yu, et al. Multi-way valve structure design and improvement [J]. Chinese Hydraulics & Pneumatics, 2022, 46(3): 38-44.

[4] 王廷栋, 杨敬. 基于流固热耦合的负载敏感多路阀仿真研究[J]. 机电工程, 2022, 39(1): 1-9.

Wang Tingdong, Yang Jing. Simulation of load-sensitive hydraulic multi-way valve based on fluid-solid-heat coupling [J]. Journal of Mechanical & Electrical Engineering, 2022, 39(1): 1-9.

[5] 王佳怡, 刘昕晖, 王展, 等. 基于AMESim的恒流量控制阀流量特性分析[J]. 吉林大学学报(工学版), 2023, 53(9): 2499-2507.

Wang Jiayi, Liu Xinhui, Wang Zhan, et al. Flow characteristics analysis of constant flow control valve based on AMESim [J]. Journal of Jilin University (Engineering and Technology Edition), 2023, 53(9): 2499-2507.

[6] Bordovsky P, Schmitz D I K, Murrenhoff D I H. CFD simulation and measurement of flow forces acting on a spool valve [J]. Energy Conversion and Management, 2016, 37: 69-75.

[7] Owczarek P, Rybarczyk D, Kubacki A. Dynamic model and simulation of electro-hydraulic proportional valve [M]. Automation 2017: Innovations in Automation, Robotics and Measurement Techniques. Cham: Springer International Publishing, 2017: 99-107.

[8] Chen C, Song Y, et al. Simulation and analysis of inclined flow channel of hydraulic slide valve [C]. Journal of Physics: Conference Series. IOP Publishing, 2020, 1707(1): 012011.

[9] Jia W, Liu Y, Yin C, et al. Effects of U-shaped two-step throttling groove parameters on cavitation erosion characteristics [J]. Journal of Theoretical and Applied Mechanics, 2021, 59(4): 529-538.

[10] 何鑫龙. 单节U形节流槽滑阀内部流场能耗机理分析[D]. 兰州: 兰州理工大学, 2021.

He Xinlong. Analysis of internal energy consumption mechanism of single section U-groove spool valve [D]. Lanzhou: Lanzhou University of Technology, 2021.

[11] 吴卫东，丁一, 蔡树文, 等. 粒子群算法的负载敏感阀节流槽结构的优化[J]. 黑龙江科技大学学报, 2021, 31(1): 68-73.

Wu Weidong, Ding Yi, Cai Shuwen, et al. Structural optimization design of notches in load-sensitive valve based on PSO algorithm [J]. Journal of Heilongjiang University of Science and Technology, 2021, 31(1): 68-73.

[12] 宋百顺. 负载敏感多路阀阀口特性及液动力的研究[D]. 大连: 大连交通大学, 2019.

Song Baishun. Research on valve port characteristics and hydraulic force of load sensitive multi-way valve [D]. Dalian: Dalian Jiaotong University, 2019.

[13] 冯贵层. L+U形节流槽过流面积分析与计算[J]. 机床与液压, 2018, 46(22): 63-65, 62.

Feng Guiceng. Analysis and calculation of the orifice area of spool with L+U type notches [J]. Machine Tool & Hydraulics, 2018, 46(22): 63-65, 62.

[14] 周永飞，初长祥, 高名乾, 等. 叠加U形槽过流面积分析与计算[J]. 机床与液压, 2017, 45(2): 110-112.

Zhou Yongfei, Chu Changxiang, Gao Mingqian, et al. Analysis and calculation of the orifice area of spoolwith U+U-type notches [J]. Machine Tool & Hydraulics, 2017, 45(2): 110-112.

[15] 崔彦斌. 拖拉机液压系统多路阀结构设计及优化[D]. 洛阳: 河南科技大学, 2017.

Cui Yanbin. Structure design and optimization of multi-way valve for tractor hydraulic system [D]. Luoyang: Henan University of Science and Technology, 2017.

[16] 谭立建, 涂攀,等. 某液压滑阀流场仿真及卡滞现象分析[C]. 2021中国汽车工程学会年会论文集(4), 2021: 648-653.

[17] 高宇龙，姚丽英, 张占东. 基于AMESim自适应大流量安全阀动态特性影响因素研究[J]. 山西大同大学学报(自然科学版), 2022, 38(2): 84-88.

Gao Yulong, Yao Liying, Zhang Zhandong. Research on influencing factors of dynamic characteristics of adaptive large flow safety valve based on AMESim [J]. Journal of Shanxi Datong University (Natural Science Edition), 2022, 38(2): 84-88.

[18] 张占东, 姚丽英, 韩灏, 等. 带有K形节流槽的液压支架换向阀改进设计[J]. 科学技术与工程, 2019, 19(27): 162-167.

Zhang Zhandong, Yao Liying, Han Hao, et al. Improved design for directional valve with K-shaped throttling grooves used in hydraulic supports [J]. Science Technology and Engineering, 2019, 19(27): 162-167.

[19] 邱雪. 基于MATLAB多路阀压力补偿阀芯特性分析[J]. 机械工程师, 2018(4): 89-90, 93.

Qiu Xue. Analysis of pressure compensation in the multi-way valve based on MATLAB [J]. Mechanical Engineer, 2018(4): 89-90, 93.

[20] Li C, Liu X, Wang Y, et al. Optimization of multi-way valve structure in digital hydraulic system of loader [J]. Energies, 2021, 14(3): 700.

[21] Mandal S, Ghosh B, Scientist A K P. Design of a spool type 4 way 3 position directional control valve for use in tractor hydraulics system [J]. International Journal of Applied Science and Engineering Research, 2016, 5(6).

[22] Zhai Liubin, Qi Xindan, et al. Analysis of secondary throttling characteristics of non-circumferential opening slide valve [J]. Hydraulic Pneumatics and Sealing, 2016, 36(4): 1-4.

Research on dynamic characteristics of tractor multi-way valve

拖拉机多路阀节流槽动态特性研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics

Comments

[1]	Meng Haodong, Zhao Jingbo, Wang Yong, Guo Yan, Dai Xudong, Xu Nianyao. Analysis and improvement of dynamic characteristics of gear chamber cover structure of agricultural diesel engine [J]. Journal of Chinese Agricultural Mechanization, 2023, 44(11): 87-92.
[2]	Ren Shuaiyang, Gao Aimin, Zhang Yong, Han Wei.. Finite element analysis and topology optimization of folding mechanism of sixrotor plant protection UAV [J]. Journal of Chinese Agricultural Mechanization, 2021, 42(9): 53-58+194.
[3]	Zhao Jichun, Wang Guojie, Wang Min, Wang Hongbiao. . Design of intelligent monitoring system for leakage of irrigation pipe networks based on embedded system [J]. Journal of Chinese Agricultural Mechanization, 2021, 42(9): 170-176.