基于响应面法的马铃薯分选机参数优化及试验*

doi:10.13733/j.jcam.issn.20955553.2021.11.13

中国农机化学报 ›› 2021, Vol. 42 ›› Issue (11): 80-88.DOI: 10.13733/j.jcam.issn.20955553.2021.11.13

基于响应面法的马铃薯分选机参数优化及试验^*

崔丽霞, 王相友, 许英超

山东理工大学农业工程与食品科学学院,山东淄博,255901

收稿日期:2021-03-15 修回日期:2021-04-19 出版日期:2021-11-15 发布日期:2021-11-15
通讯作者: 许英超,女,1980年生,山东威海人,博士,副教授;研究方向为农产品加工技术与装备。E-mail: xuyingchao2005@163.com
作者简介:崔丽霞,女,1994年生,山东烟台人,硕士研究生;研究方向为农产品加工技术与装备。E-mail: 15615633520@126.com
基金资助:
*山东省自然科学基金(ZR2020MC216)

Parameter optimization and experiment of potato sorter based on response surface method

Cui Lixia, Wang Xiangyou, Xu Yingchao

School of Agricultural Engineering and Food Science, Shandong University of Technology, Zibo, 255901, China

Received:2021-03-15 Revised:2021-04-19 Online:2021-11-15 Published:2021-11-15

摘要/Abstract

摘要： 为减少马铃薯在分选过程中的跌落损伤,探讨分选机的工作条件对马铃薯跌落损伤的影响,以“荷兰15”马铃薯为试验材料,以马铃薯分选机的输送速度、剔除力、马铃薯的下落高度和含水率为试验因素,以马铃薯的跌落损伤等级为响应值,进行二次回归正交旋转试验,通过Design-Expert 8.0.6软件对试验结果畸形方差分析,并通过响应面探究各试验因素对马铃薯的跌落损伤等级的影响规律,确定马铃薯分选机的最佳工作参数。跌落试验结果表明:对马铃薯跌落损伤等级的影响程度主次顺序为马铃薯含水率、下落高度、输送速度、剔除力。当马铃薯输送速度为0.3 m/s,剔除力为15 N,下落高度为45 cm,含水率为75.36%时,在该参数组合下分选机对马铃薯跌落损伤等级最小。试验所得马铃薯的实际跌落损伤等级为0.84,该结果与马铃薯跌落损伤预测等级具有良好的拟合性。

关键词: 马铃薯分选机, 跌落损伤, 响应面, 参数优化

Abstract: In order to reduce the potatoes drop damage in the process of sorting and explore the separator working conditions than can influence the potato drop damage, this paper took 'Helan15' as the experimental material, using the conveying speed, excluding force, the drop height and the moisture content of potato separator as the test factors, and potato drop damage level as the response value, Quadratic regression orthogonal rotation test was carried out. The malformed variance analysis of the test results was conducted by Design-Expert 8.0.6 software. The influence of each experimental factor on the damage level of potato drop was explored by response surface, and the optimal working parameters of potato sorter were determined. The results of the drop test showed that the order of the degree of influence on the damage level of potato drop was water content, drop height, conveying speed, and removal force. When the conveying speed was 0.3 m/s, the removing force was 15 N, the falling height was 45 cm, and the water content was 75.36%, the sorting machine had the lowest drop damage grade on potatoes. The actual drop damage grade of potatoes was 0.84, which fitted well with the predicted value.

Key words: potato sorter, drop injury, response surface, parameter optimization

中图分类号:

S532

崔丽霞, 王相友, 许英超. 基于响应面法的马铃薯分选机参数优化及试验^*[J]. 中国农机化学报, 2021, 42(11): 80-88.

Cui Lixia, Wang Xiangyou, Xu Yingchao. Parameter optimization and experiment of potato sorter based on response surface method[J]. Journal of Chinese Agricultural Mechanization, 2021, 42(11): 80-88.

参考文献

[1] 张建华, 金黎平, 谢开云, 等. 不同基因型马铃薯块茎损伤性状的综合评价[J]. 中国农业科学, 2009, 42(1): 198-203.
Zhang Jianhua, Jin Liping, Xie Kaiyun, et al. Comprehensive evaluation of potato bruises in different genotypes [J]. Scientia Agricultura Sinica, 2009, 42(1): 198-203.
[2] 王咏梅, 孙伟, 王关平. 关于马铃薯收获中机械损伤的研究[J]. 安徽农业科学, 2014(9): 2837-2840.
Wang Yongmei, Sun Wei, Wang Guanping. Research on mechanical damage to potato in harvesting [J]. Journal of Anhui Agrcultural Sciences, 2014(9): 2837-2840.
[3] Baritelle A L, Hyde G M. Specific gravity and cultivar effects on potato tuber impact sensitivity [J]. Postharvest Biology & Technology, 2003, 29(3): 279-286.
[4] Ito M, Sakai K, Takai M, et al. Technical notes: damage to the surface of potatoes from collision [J]. Transactions of the ASAE, 1994, 37(5): 1431-1433.
[5] Mathew R, Hyde G M. Potato impact damage thresholds [J]. Transactions of the ASAE, 1997, 40(3): 705-709.
[6] 张建华, 金黎平, 谢开云, 等马铃薯块茎性状对块茎损伤的影响[J]. 园艺学报, 2008, 35(10): 1455-1460.
Zhang Jianhua, Jin Liping, Xie Kaiyun, et al. Analysis of potato tuber characters impact on tuber bruises [J]. Acta Horticulturae Sinica, 2008, 35(10): 1455-1460.
[7] 桑永英, 张东兴, 张梅梅. 马铃薯碰撞损伤试验研究及有限元分析[J]. 中国农业大学学报, 2008, 13(1): 81-84.
Sang Yongying, Zhang Dongxing, Zhang Meimei. Study on bruising damage experiment of potato and finite element analysis [J]. Journal of China Agricultural University, 2008: 13(1): 81-84.
[8] 胡奔. 马铃薯跌落损伤机理与防损伤装置研究[D]. 成都: 西华大学, 2018.
Hu Ben. Study on potato dropping damage mechanism and damage-proof device [D]. Chengdu: Xihua University, 2018.
[9] 张华, 崔永祯, 刘小龙, 等. 机械收获中马铃薯损伤原因及改进措施[J]. 林业机械与木工设备, 2019, 47(7): 17-22.
Zhang Hua, Cui Yongzhen, Liu Xiaolong, et al. Analysis of causes of damage to potatoes duringmechanical harvest and improvement measures [J]. Forestry Machinery & Woodworking Equipment, 2019, 47(7): 17-22.
[10] 吕金庆, 杨晓涵, 吕伊宁, 等. 马铃薯挖掘机升运分离过程块茎损伤机理分析与试验[J]. 农业机械学报, 2020, 51(1): 103-113.
Lü Jinqing, Yang Xiaohan, Lü Yining, et al. Analysis and experiment of potato damage in process of lifting and separating potato excavator [J]. Transactions of the Chinese Society for Agricultural Machinery, 2020, 51(1): 103-113.
[11] 张建华. 马铃薯块茎损伤评价技术研究及损伤变色性状的遗传分析[D]. 北京: 中国农业科学院, 2008.
Zhang Jianhua. Assessment technology and genetic analysis for tuber browing in potato [D]. Beijing: Chinese Academy of Agricultural Sciences, 2008.
[12] 孙慧杰. 库尔勒香梨跌落碰撞接触应力分析及损伤预测的研究[D]. 石河子: 石河子大学, 2014.
Sun Huijie. Contact pressure analysis of drop impact for korla pear and bruising predication using finite element analysis [D]. Shihezi: Shihezi University, 2014.
[13] 冯斌, 孙伟, 孙步功, 等. 收获期马铃薯块茎跌落冲击特性及损伤规律研究[J]. 振动与冲击, 2019, 38(24): 267-274.
Feng Bin, Sun Wei, Sun Bugong, et al. A study on dropping impact characteristics and damage regularity of potato tubers during harvest [J]. Journal of Vibration and Shock, 2019, 38(24): 267-274.
[14] 卢立新, 黄祥飞, 华岩. 基于模拟运输条件的梨果实包装振动损伤研究[J]. 农业工程学报, 2009, 25(6): 110-114.
Lu Lixin, Huang Xiangfei, Hua Yan. Effect of packaging methods on vibration bruising of pear fruits by simulated transport tests [J]. Transactions of the Chinese Society of Agricultural Engineering, 2009, 25(6): 110-114.
[15] 姜彦武, 魏宏安, 陆翔辉, 等. 马铃薯分选机的设计[J]. 甘肃农业大学学报, 2017, 52(1): 139-143.
Jiang Yanwu, Wei Hong'an, Lu Xianghui, et al. Design of potato tuber sorter [J]. Journal of Gansu Agricultural University, 2017, 52(1): 139-143.
[16] 王相友, 孙景彬, 许英超, 等. 拨辊推送式马铃薯清选分选机设计与试验[J]. 农业机械学报, 2017, 48(10): 316-322, 279.
Wang Xiangyou, Sun Jingbin, Xu Yingchao, et al. Design and experiment of potato cleaning and sorting machine[J]. Transactions of the Chinese Society for Agricultural Machinery, 2017, 48(10): 316-322, 279.
[17] 洪翔, 万陈, 王军. 一种马铃薯临界损伤跌落高度的测定方法[J]. 包装学报, 2012(3): 30-33.
Hong Xiang, Wan Chen, Wang Jun. A method to determine the critical damage dropping height of potato[J]. Packaging Journal, 2012(3): 30-33.
[18] 郭世鲁, 王卫兵, 李猛, 等. 马铃薯机械碰撞有限元分析与试验研究[J]. 机械设计与制造工程, 2016, 45(1): 56-59.
Guo Shilu, Wang Weibing, Li Meng, et al. Research on the test of potato mechanism and finite element analysis for crash [J]. Machine Design and Manufacturing Engineering, 2016, 45(1): 56-59.
[19] Hafsa J, Hammi K M, Cerf D L, et al. Characterization, antioxidant and antiglycation properties of polysaccharides extracted from the medicinal halophyte Carpobrotus edulis L. [J]. International Journal of Biological Macromolecules, 2017: S0141813017311972.
[20] Balasubramanian B, Ilavenil S, Al-Dhabi N A, et al. Isolation and characterization of Aspergillus sp. for the production of extracellular polysaccharides by response surface methodology [J]. Saudi Journal of Biological Sciences, 2018, 26(3): 449-454.

基于响应面法的马铃薯分选机参数优化及试验^*

Parameter optimization and experiment of potato sorter based on response surface method

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 10

编辑推荐

Metrics

本文评价

[1]	陈盼阳, 秦维彩, 王宝坤. 植保无人飞机施药技术研究进展[J]. 中国农机化学报, 2022, 43(1): 67-79.
[2]	于家川, 李明军, 李伟, 廖培旺, 李明升, 张爱民. 旋耕式棉花封土机的优化与试验[J]. 中国农机化学报, 2022, 43(1): 33-38.
[3]	张三强, 邹星, 陈源, 章桃娟. 船式拖拉机气层减阻影响因素分析与参数优化研究[J]. 中国农机化学报, 2022, 43(1): 20-26.
[4]	刘坤宇;苏宏杰;李飞宇;焦巍;. 基于响应曲面法的土壤离散元模型的参数标定研究[J]. 中国农机化学报, 2021, 42(9): 143-149.
[5]	丁文波;朱继平;陈伟;张晋;袁栋;丁艳;. 基于EDEM的青稞接触参数仿真标定[J]. 中国农机化学报, 2021, 42(9): 114-121.
[6]	扈凯;张文毅;李坤;刘宏俊;祁兵;纪要;. 基于模态规划法的履带拖拉机车架振动分析与优化[J]. 中国农机化学报, 2021, 42(8): 121-126.
[7]	段建;陈树人;张体强;. 黄花苜蓿收获机设计与试验[J]. 中国农机化学报, 2021, 42(8): 10-17.
[8]	何潇;王璐;冯炜弘;殷芳群;牛慧婷;汪建旭;. 混凝沉淀法预处理蔬菜废弃物压榨液工艺参数优化研究[J]. 中国农机化学报, 2021, 42(7): 69-75.
[9]	褚斌;吴爱兵;韩梦龙;李寒松;张宗超;赵峰;. 畜禽粪便堆沤有机肥撒肥机设计与试验[J]. 中国农机化学报, 2021, 42(2): 58-65.
[10]	廖培旺;王仁兵;宫建勋;刘凯凯;张爱民;李伟;. 基于响应面法的棉秆压捆试验研究[J]. 中国农机化学报, 2021, 42(10): 112-120.