基于离散元法的潮湿甘蔗复合肥参数标定

doi:10.13733/j.jcam.issn.2095-5553.2024.01.032

摘要/Abstract

摘要： 为能准确建立潮湿甘蔗复合肥的离散元模型，合理设置仿真参数，提高肥料颗粒动力学仿真结果的准确性，以休止角为响应值，对不同含水率的甘蔗复合肥进行试验研究。通过卸料仓法建立含水率与休止角的三元回归方程，决定系数为0.99；基于HertzMindlin with JKR粘结模型，通过PlackettBurman试验、爬坡试验和BoxBehnken试验从9个初始参数筛选出JKR表面能、甘蔗复合肥剪切模量、甘蔗复合肥与不锈钢静摩擦系数、甘蔗复合肥间静摩擦系数、甘蔗复合肥间恢复系数5项显著性参数，并建立休止角—离散元参数模型，模型P值小于0.01，变异系数为6.35%；最后，通过对不同含水率下的最佳参数组合进行仿真休止角试验，仿真结果与物理休止角试验的相对误差小于7.66%，验证不同含水率的甘蔗复合肥参数标定结果和研究方法是合理可靠的。研究结果可为基于离散元法的甘蔗施肥机械动力学仿真研究提供参考。

关键词: 潮湿甘蔗复合肥, 含水率, 离散元, 参数标定

Abstract: In order to accurately establish the discrete element model of moist sugarcane compound fertilizer, reasonably set the simulation parameters, and improve the accuracy of the simulation results of fertilizer particle dynamics, the angle of repose was used as the response value, and the sugarcane compound fertilizer with different moisture content was tested. The ternary regression equation of moisture content and angle of repose was established by the unloading bin method, and the coefficient of determination was 0.99. HertzMindlinwith JKR was used as the bonding model, and JKR surface energy, the shear modulus of sugarcane compound fertilizer, the static friction coefficient between sugarcane compound fertilizer and stainless steel, the static friction coefficient between sugarcane compound fertilizers, and the coefficient of restitution between sugarcane compound fertilizers were selected from nine initial parameters. Then the angle of reposediscrete element parameters model was established, the Pvalue of the model was less than 0.01, the coefficient of variation was 6.35%. Finally, through the simulation angle of repose test of the optimal parameter combination under different moisture content, the relative error between the simulation results and the physical angle of repose test was less than 7.66%, which verified that the calibration results and research methods of sugarcane compound fertilizer parameters with different moisture contents were reasonable and reliable. The research results could provide reference for the simulation research of sugarcane fertilization mechanical dynamics based on discrete element method.

Key words: moist sugarcane compound fertilizer, moisture content, discrete element, parameter calibration

中图分类号:

S225.5+3

陈远玲, 王梦乔, 金亚光, 侯怡, 李尚平. 基于离散元法的潮湿甘蔗复合肥参数标定[J]. 中国农机化学报, 2024, 45(1): 229-236.

Chen Yuanling, Wang Mengqiao, Jin Yaguang, Hou Yi, Li Shangping. Parameter calibration of moist sugarcane compound fertilizer based on discrete element method[J]. Journal of Chinese Agricultural Mechanization, 2024, 45(1): 229-236.

参考文献

［1］杨祖丽. 不同肥料处理对甘蔗产量和蔗糖分的影响［J］. 甘蔗糖业, 2020(3): 52-57.Yang Zuli. Effects of different fertilizer treatments on yield and sucrose content of sugarcane ［J］. Sugarcane and Canesugar, 2020(3): 52-57.
［2］ Zhao H, Huang Y, Liu Z, et al. Applications of discrete element method in the research of agricultural machinery: A review ［J］. Agriculture, 2021, 11(5): 425.
［3］李尚平, 张伟, 黄宗晓, 等. 基于离散元法的自走式甘蔗转运车车厢稳定性研究［J］. 农业机械学报, 2020, 51(2): 374-382.
Li Shangping, Zhang Wei, Huang Zongxiao, et al. Stability of carriages of selfpropelled sugarcane transporters based on discrete element method ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2020, 51(2): 374-382.
［4］赵宏波, 何进, 李洪文, 等. 条带式旋切后抛防堵装置设计与试验［J］. 农业机械学报, 2018, 49(5): 65-75.
Zhao Hongbo, He Jin, Li Hongwen, et al. Design and experiment of strip rotarycutthrow antiblocking implement ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2018, 49(5): 65-75.
［5］ Daniyan I A, Omokhuale A M, Aderoba A A, et al. Development and performance evaluation of organic fertilizer machinery ［J］. Cogent Engineering, 2017, 4(1).
［6］ Leblicq T, Smeets B, Ramon H, et al. A discrete element approach for modelling the compression of crop stems ［J］. Computers and Electronics in Agriculture, 2016, 123: 80-88.
［7］胡永光, 杨叶成, 肖宏儒, 等. 茶园施肥机离心撒肥过程仿真与参数优化［J］. 农业机械学报, 2016, 47(5): 77-82.
Hu Yongguang, Yang Yecheng, Xiao Hongru, et al. Simulation and parameter optimization of centrifugal fertilizer spreader for tea plants ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(5): 77-82.
［8］ Zha X, Zhang G, Han Y, et al. Structural optimization and performance evaluation of blocking wheeltype screw fertilizer distributor ［J］. Agriculture, 2021, 11(3): 248.
［9］ Ding S, Bai L, Yao Y, et al. Discrete element modelling (DEM) of fertilizer dualbanding with adjustable rates ［J］. Computers and Electronics in Agriculture, 2018, 152: 32-39.
［10］刘彩玲, 黎艳妮, 宋建农, 等. 基于EDEM的离心甩盘撒肥器性能分析与试验［J］. 农业工程学报, 2017, 33(14): 32-39.
Liu Cailing, Li Yanni, Song Jiannong, et al. Performance analysis and experiment on fertilizer spreader with centrifugal swing disk based on EDEM ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2017, 33(14): 32-39.
［11］彭才望, 许道军, 贺喜, 等. 黑水虻处理的猪粪有机肥离散元仿真模型参数标定［J］. 农业工程学报, 2020, 36(17): 212-218.
Peng Caiwang, Xu Daojun, He Xi, et al. Parameter calibration of discrete element simulation model for pig manure organic fertilizer treated with Hermetia illucen ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2020, 36(17): 212-218.
［12］刘彩玲, 魏丹, 宋建农, 等. 颗粒肥料离散元仿真边界参数系统化研究［J］. 农业机械学报, 2018, 49(9): 82-89.
Liu Cailing, Wei Dan, Song Jiannong, et al. Systematic study on boundary parameters of discrete element simulation of granular fertilizer ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2018, 49(9): 82-89.
［13］王黎明, 范盛远, 程红胜, 等. 基于EDEM的猪粪接触参数标定［J］. 农业工程学报, 2020, 36(15): 95-102.
Wang Liming, Fan Shengyuan, Cheng Hongsheng, et al. Calibration of contact parameters for pig manure based on EDEM ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2020, 36(15): 95-102.
［14］向伟, 吴明亮, 吕江南, 等. 基于堆积试验的黏壤土仿真物理参数标定［J］. 农业工程学报, 2019, 35(12): 116-123.
Xiang Wei, Wu Mingliang, Lü Jiangnan, et al. Calibration of simulation physical parameters of clay loam based on soil accumulation test ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2019, 35(12): 116-123.
［15］ Ucgul M, Fielke J M, Saunders C. 3D DEM tillage simulation: Validation of a hysteretic spring (plastic) contact model for a sweep tool operating in a cohesionless soil ［J］. Soil and Tillage Research, 2014, 144: 220-227.
［16］ Ucgul M, Fielke J M, Saunders C. Threedimensional discrete element modelling (DEM) of tillage: Accounting for soil cohesion and adhesion ［J］. Biosystems Engineering, 2015, 129: 298-306.
［17］罗帅, 袁巧霞, Gouda Shaban, 等. 基于JKR粘结模型的蚯蚓粪基质离散元法参数标定［J］. 农业机械学报, 2018, 49(4): 343-350.
Luo Shuai, Yuan Qiaoxia, Gouda Shaban, et al. Parameters calibration of vermicomposting nursery substrate with discrete element method based on JKR contact model ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2018, 49(4): 343-350.
［18］穆桂脂, 亓协腾, 张万枝, 等. 碎甘薯秧离散元仿真参数测量与标定［J］. 中国农机化学报, 2021, 42(11): 72-79.
Mu Guizhi, Qi Xieteng, Zhang Wanzhi, et al. Parameter measurement and calibration in discrete element simulation of broken sweet potato seedlings ［J］. Journal of Chinese Agricultural Mechanization, 2021, 42(11): 72-79.
［19］温翔, 杨望, 郭无极, 等. 切段式甘蔗收割机排杂离散元仿真参数标定及验证［J］. 中国农机化学报, 2020, 41(1): 12-18.
Wen Xiang, Yang Wang, Guo Wuji, et al. Parameter determination and validation of discrete element model of segmented sugarcane harvester for impurity removal ［J］. Journal of Chinese Agricultural Mechanization, 2020, 41(1): 12-18.
［20］李贝, 陈羽, 孙平, 等. 滚动摩擦系数工程测量方法与验证［J］. 工程机械, 2017, 48(4): 29-32, 7-8.
［21］ Johnson K L, Kendall K, Roberts A D. Surface energy and the contact of elastic solids ［J］. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1971, 324(1558): 301-313.
［22］ DEM Solutions. EDEM 2.6 theory reference guide ［M］. Edinburgh: DEM Solutions, 2014.

[1]	刘涵, 申屠留芳, 孙星钊, 王萌, 张鹏程. 基于响应面法的缢蛏壳肉分离装置工艺参数研究[J]. 中国农机化学报, 2024, 45(1): 122-129.
[2]	邓志远, 曹修全, 胡光忠, , 谢光玉, 王平. 基于DEM-MBD耦合的履带式全地形车辆爬坡特性研究[J]. 中国农机化学报, 2024, 45(1): 144-151.
[3]	徐庄威, , 王士林, , 易中懿, , 潘健, , 吕晓兰, . 基于JKR模型的辣椒籽离散元参数标定[J]. 中国农机化学报, 2023, 44(9): 85-95.
[4]	陈宇, 张涛, 林通, 庞有伦, 李相, 罗书强. 基于EDEM的废菌棒粉碎分离机设计与试验[J]. 中国农机化学报, 2023, 44(9): 104-111.
[5]	戚得众, , 阮晓松, , 孙强, , 杨文广, , 高伟周, . 芒果碰撞损伤及行间运输车降损性能研究[J]. 中国农机化学报, 2023, 44(9): 112-116.
[6]	闫建伟, 魏松, 张万萍, 张富贵. 白萝卜种子颗粒接触参数标定[J]. 中国农机化学报, 2023, 44(8): 1-11.
[7]	杨正, 李国锋, 石林榕, 王尊. 玉米种子静摩擦系数测定及离散元法验证[J]. 中国农机化学报, 2023, 44(8): 12-16.
[8]	李洪昌, , 高芳. 搅种托种型小麦气吸式精量排种器参数化设计与试验[J]. 中国农机化学报, 2023, 44(7): 9-15.
[9]	李娜, 刘磊, 徐鹏云, 李姜维, 姜海勇, 王伟. 基于离散元法的皂荚壳籽分离仿真与试验[J]. 中国农机化学报, 2023, 44(7): 163-169.
[10]	陈书法, 牛晏瑞, 芦新春, 杨进, 董志国, 冯博. 基于离散元法的扇贝肉壳分离直线振动筛仿真与试验[J]. 中国农机化学报, 2023, 44(5): 107-114.
[11]	徐兵, 郑德聪, 崔清亮. 基于EDEM的荞麦籽粒建模及振动筛分数值模拟[J]. 中国农机化学报, 2023, 44(5): 121-126.
[12]	邵伟, 张文毅, 纪要, 严伟, 刘宏俊. 甘薯除草部件设计与仿真研究[J]. 中国农机化学报, 2023, 44(4): 50-56.
[13]	章启祥, 刘发英, 杨振宇, 李继伟, 韩梦杰, 李学强. 基于离散元的马铃薯分选装置运行参数优化与试验[J]. 中国农机化学报, 2023, 44(4): 96-103.
[14]	丁力, 徐宇飞, 屈哲, 豆宇飞, 王万章, 李赫. 基于EDEM小麦收获机清选损失监测试验装置设计[J]. 中国农机化学报, 2023, 44(3): 13-21.
[15]	李昊, 张猛强, 尹勇, 张宏, . 流固耦合方法在农业工程中的应用[J]. 中国农机化学报, 2023, 44(2): 20-28.