“绿洲一号”穴盘苗茎秆力学特性试验

doi:10.13733/j.jcam.issn.2095-5553.2023.10.001

摘要/Abstract

摘要： 探究“绿洲一号”穴盘苗茎秆的力学特性，为研制、优化移栽取苗机构提供理论指导。采用万能物料试验机开展“绿洲一号”穴盘苗茎秆的拉伸、径向压缩、弯曲以及穴盘苗的脱盘试验并完成形态特征测量，结合有限元分析法对茎秆径向压缩进行仿真分析。结果表明：在加载速度相同情况下，0~20mm段茎秆拉断力以及最大压缩力高于20~40mm段；在相近试验直径下，加载速度越大，茎秆的抗弯特性表现更好；“绿洲一号”穴盘苗的脱盘力的范围为2.01~10.81N、平均值为5.16N，表明夹茎秆取苗方式可以满足取苗要求；开展径向压缩仿真分析，径向压缩时茎秆的上顶圆弧面处的应力与应变均为最大，并且得到仿真值与试验值的偏差范围为3.5%~15.5%。试验表明：0~20mm段茎秆的力学性能优于20~40mm段，结果可以为后续“绿洲一号”移栽取苗机构的设计提供理论参考。

关键词: “绿洲一号”穴盘苗, 茎秆, 力学特性, 移栽取苗, 有限元分析法

Abstract: The mechanical characteristics of the stem of “Oasis No.1” hole tray seedlings were studied to provide theoretical guidance for the development and optimization of transplanting and seeding mechanism. The universal material testing machine was used to carry out the tensile, radial compression and bending tests of the stem of “Oasis No.1” hole plate seedlings and the peeling tests of the hole plate seedlings, and the morphological characteristics were measured. The radial compression of the stem was simulated and analyzed with the finite element analysis method. The test results showed that under the same loading speed, the breaking force and maximum compression force of the 0-20 mm segment of the stem were higher than those of the 20-40 mm segment of the stem. At the same test diameter, the higher the loading speed, the better the bending resistance performance of the stem. The range of the disc force of the “Oasis No.1” hole tray seedlings was 2.01-10.81 N, and the average value was 5.16 N, indicating that the mode of shoot retrieval by clamp stalk could meet the requirements of shoot retrieval. The radial compression simulation analysis showed that the stress and strain at the top arc surface of the stem were the maximum during radial compression, and the deviation of the simulation value from the test value was obtained in the range of 3.5%-15.5%. The experimental results showed that the mechanical properties of stems with a length of 0-20 mm were better than those with a length of 20-40 mm. The results can provide a theoretical reference for the design of the transplanting and seedling picking mechanism of “Oasis No.1” in the future.

Key words: “Oasis No.1” hole seedling, stem, mechanical properties, transplant and pick seedlings, finite element analysis method

中图分类号:

S223.9

叶大鹏, , 青家兴, , 林志强, , 赖鸿康, 翁海勇, , 谢立敏, . “绿洲一号”穴盘苗茎秆力学特性试验[J]. 中国农机化学报, 2023, 44(10): 1-7.

Ye Dapeng, , Qing Jiaxing, , Lin Zhiqiang, , Lai Hongkang, Weng Haiyong, , Xie Limin, . Experiment on mechanical characteristics of stem of “Oasis No.1” hole seedling[J]. Journal of Chinese Agricultural Mechanization, 2023, 44(10): 1-7.

参考文献

［1］　高方超. 新型牧草巨菌草“绿洲一号”快繁技术研究［D］. 新乡: 河南科技学院, 2020.
Gao Fangchao. Study on the rapid propagation technology of a new type of herbage giant fungus “Oasis No.1” ［D］. Xinxiang: Henan Institute of Science and Technology, 2020.
［2］　刘彦华. 巨菌草丰产栽培技术研究［D］. 呼和浩特: 内蒙古农业大学, 2021.
Liu Yanhua. Studies on highyielding cultivation techniques of Pennisetum gigantean ［D］. Hohhot: Inner Mongolia Agricultural University, 2021.
［3］　燕亚民, 乔新丽, 张贵明, 等. 烟草移栽机送苗装置设计与试验［J］. 中国农机化学报, 2020, 41(4): 24-28.
Yan Yamin, Qiao Xinli, Zhang Guiming, et al. Design and test of seedling device for tobacco transplanter ［J］. Journal of Chinese Agricultural Mechanization, 2020, 41(4): 24-28.
［4］　俞高红, 王磊, 孙良, 等. 大田机械化移栽技术与装备研究进展［J］. 农业机械学报, 2022, 53(9): 1-20.
Yu Gaohong, Wang Lei, Sun Liang, et al. Advancement of mechanized transplanting technology and equipments for field crops ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2022, 53(9): 1-20.
［5］　韩长杰, 肖立强, 徐阳, 等. 辣椒穴盘苗自动移栽机设计与试验［J］. 农业工程学报, 2021, 37(13): 20-29.
Han Changjie, Xiao Liqiang, Xu Yang, et al. Design and experiment of the automatic transplanter for chili plug seedlings ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2021, 37(13): 20-29.
［6］　孔凡婷, 吴腾, 陈长林, 等. 籽棉压缩与应力松弛力学特性及模型构建［J］. 农业工程学报, 2021, 37(7): 53-60.
Kong Fanting, Wu Teng, Chen Changlin, et al. Mechanical properties and construction of constitutive model for compression and stress relaxation of seed cotton ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2021, 37(7): 53-60.
［7］　谢守勇, 张小亮, 刘凡一, 等. 基于钵苗力学特性取投苗装置动力学分析与试验［J/OL］. 吉林大学学报(工学版): 1-12［2023-01-30］.https://doi.org/10.13229/j.cnki.jdxbgxb20220139.
［8］　贾生涛, 牛长河, 王学农, 等. 新疆大蒜物料及力学特性试验研究［J］. 中国农机化学报, 2021, 42(5): 81-86.
Jia Shengtao, Niu Changhe, Wang Xuenong, et al. Research and experiment of Xinjiang garlic materials and mechanical properties ［J］. Journal of Chinese Agricultural Mechanization, 2021, 42(5): 81-86.
［9］　李红波, 薛晋霞, 王炳轩, 等. 谷子茎秆叶鞘叶片及其结合部位的拉伸力学性能［J］. 农业工程学报, 2020, 36(18): 11-17.
Li Hongbo, Xue Jinxia, Wang Bingxuan, et al. Tensile properties of foxtail millet leaf sheath, leaf and leaf collar ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2020, 36(18): 11-17.
［10］　史瑞杰, 戴飞, 赵武云, 等. 胡麻茎秆生物力学特性试验［J］. 中国农机化学报, 2018, 39(11): 45-50.
Shi Ruijie, Dai Fei, Zhao Wuyun, et al. Biomechanical properties test of flax stem ［J］. Journal of Chinese Agricultural Mechanization, 2018, 39(11): 45-50.
［11］　高文硕, 宋卫东, 王教领, 等. 金针菇拉伸试验研究［J］. 中国农机化学报, 2020, 41(6): 106-111.
Gao Wenshuo, Song Weidong, Wang Jiaoling, et al. Study on the tensile test of Flammulin velutipes ［J］. Journal of Chinese Agricultural Mechanization, 2020, 41(6): 106-111.

[1]	马士鑫, 宋卫东, 丁天航, 王明友, 吴耀东, 周德欢. 脱袋转色期香菇菌棒物理力学特性研究[J]. 中国农机化学报, 2023, 44(9): 79-84.
[2]	王涛, 闫小丽, 米国鹏, 刘溯源, 张振国, 刘正道. 硬质茎秆切割装置研究现状[J]. 中国农机化学报, 2023, 44(8): 34-39.
[3]	张祥辉, 孙群, 赵栋杰, 许亚辉. 葡萄嫁接苗木的切削特性研究[J]. 中国农机化学报, 2023, 44(5): 58-62.
[4]	刘磊, 石磊, 孔凡婷, 吴腾, 陈长林, 孙勇飞. 蓖麻植株力学特性试验研究[J]. 中国农机化学报, 2023, 44(2): 14-19.
[5]	王佳, 李绍波, 陈春皓, 李建平, 薛春林, 边永亮. 葡萄茎秆切割装置作业参数优化与试验[J]. 中国农机化学报, 2023, 44(2): 37-45.
[6]	胡双燕, 胡敏娟, 张文毅, 蒋展. 辣椒穴盘苗茎秆力学特性试验与仿真研究[J]. 中国农机化学报, 2022, 43(3): 9-18.
[7]	何勋, 吕严柳, 王万章, 周正, 何豪, 郭海钦. 不同含水率对油莎豆物理特性及力学特性的影响[J]. 中国农机化学报, 2022, 43(1): 80-85.
[8]	谢志平, 郎彦城, 陈璐琪, . 类球体果实生物力学特性研究综述[J]. 中国农机化学报, 2021, 42(9): 96-106.
[9]	孙延成;牟孝栋;王志伟;姜慧新;王志坚;耿端阳;. 构树收获机设计与试验[J]. 中国农机化学报, 2021, 42(7): 26-32+75.
[10]	夏鼎宽;邓干然;何冯光;郑爽;李玲;覃双眉;. 木薯茎秆粉碎还田机刀片离地间隙控制系统设计与仿真分析[J]. 中国农机化学报, 2021, 42(7): 62-68.
[11]	李洋;王敏;温宝琴;李景彬;李利桥;坎杂;. 基于灰色关联理论的甘草茎秆力学特性试验研究[J]. 中国农机化学报, 2021, 42(6): 72-78.
[12]	马志艳;张徐康;杨光友;. 基于改进Mask R-CNN的水稻茎秆杂质分割方法研究[J]. 中国农机化学报, 2021, 42(6): 145-150.
[13]	贾生涛;牛长河;王学农;石鑫;杨会民;刘旋峰;. 新疆大蒜物料及力学特性试验研究[J]. 中国农机化学报, 2021, 42(5): 81-86.
[14]	李玲;邓干然;李国杰;郑爽;崔振德;. 高良姜须根剪切力学特性试验研究[J]. 中国农机化学报, 2020, 41(8): 116-120.
[15]	赵晨阳;郭俊先;刘娜;王彦;. 和田地区适宜机械化移栽的辣椒穴盘苗研究[J]. 中国农机化学报, 2020, 41(7): 40-45.