气吸式小青菜精密排种器设计与试验

doi:10.13733/j.jcam.issn.20955553.2022.06.007

摘要/Abstract

摘要： 针对小青菜播种环节存在的精密排种与农艺匹配不够、机械化水平较低的问题，设计一款气吸式小青菜精密排种器。首先，对排种器结构及工作原理进行阐释；随后，通过理论计算确定排种器的主要参数；其次，使用计算流体力学方法（CFD），借助FLUENT软件分析排种器内部流场分布，得到排种器内部压力分布云图、气流速度矢量云图，验证吸种、携种及排种气流场设计；最后，进行台架验证试验。设计的气吸式小青菜精密排种器的平均合格率、平均漏播率、平均重播率分别为93.18%、2.34%、4.48%。试验验证了排种器具有良好的排种性能，满足小青菜精密播种要求。

关键词: 小青菜, 气吸式排种器, 精密播种, 计算流体力学

Abstract: With regards to the problems of low mechanization level coupled with mismatch between machine type and agronomy that face the seeding of Brassica napus, an airabsorbing type precision seeder for Brassica napus was designed. The structure and working principle of seed metering device were expounded first; then the main parameters of the seeder were determined through theoretical calculation; third, the internal flow field distribution of seed metering device was analyzed in virtue of computational fluid dynamics (CFD) method and FLUENT software and both the cloud diagram of internal pressure distribution and air velocity vector of seed metering device were finally obtained, which verifies the design of seed suction, seed carrying and seed metering air field. Finally, the average qualified rate, missed rate, and multiplied rate of the seed metering apparatus were determined using a bench test whereby the values were found to be 93.18%, 2.34%, and 4.48%, respectively. It was verified through the test that the device stands out in seed metering and could satisfy the requirements of precision sowing of Brassica napus.

Key words: Brassica Chinensis, air suction seed metering device, precision seeding, computational fluid dynamics

中图分类号:

S223.2+3

王浩屹, 孙新平, 陈曦, 李骅, 王永健, . 气吸式小青菜精密排种器设计与试验[J]. 中国农机化学报, 2022, 43(6): 51-57.

Wang Haoyi, Sun Xinping, Chen Xi, Li Hua, Wang Yongjian. . Design and test of air suction precision seed metering device for Brassica Chinensis[J]. Journal of Chinese Agricultural Mechanization, 2022, 43(6): 51-57.

参考文献

［1］朱正阳. 苏南地区小青菜生产关键环节机械化技术研究与实践［J］. 安徽农学通报, 2021, 27(2): 124-125.
Zhu Zhengyang. Research and practice of the mechanization technology in Brassica Chinensis production in Southern Jiangsu ［J］. Anhui Agricultural Science Bulletin, 2021, 27(2): 124-125.
［2］朱方林, 侯喜林. 江苏省蔬菜产业发展政策建议［J］. 长江蔬菜, 2020(6): 33-35.
［3］李继伟, 卞丽娜, 詹国祥, 等. 设施小青菜生产关键环节机械化技术研究与实践［J］. 农业装备技术, 2017, 43(6): 16-18.
［4］肖体琼, 崔思远, 陈永生, 等. 我国蔬菜生产概况及机械化发展现状［J］. 中国农机化学报, 2017, 38(8): 107-111.
Xiao Tiqiong, Cui Siyuan, Chen Yongsheng, et al. Development status of vegetable production and its mechanization in China ［J］. Journal of Chinese Agricultural Mechanization, 2017, 38(8): 107-111.
［5］陈永生. 中国蔬菜生产机械化2018年度发展报告［J］. 中国农机化学报, 2019, 40(4): 1-6, 18.
Cheng Yongsheng. China vegetable production mechanization development report in 2018 ［J］. Journal of Chinese Agricultural Mechanization, 2019, 40(4): 1-6, 18.
［6］李洪昌, 高芳, 赵湛, 等.国内外精密排种器研究现状与发展趋势［J］. 中国农机化学报, 2014,35(2): 12-16, 56.
Li Hongchang, Gao Fang, Zhao Zhan, et al. Domestic and overseas research status and development trend of precision seedmetering device ［J］. Journal of Chinese Agricultural, 2014, 35(2): 12-16, 56.
［7］胡童, 齐新丹, 李骅, 等. 国内外蔬菜播种机的应用现状与研究进展［J］.江西农业学报, 2018, 30(2): 87-92.
Hu Tong, Qi Xindan, Li Hua, et al. Application status and research progress of vegetable seeder in china and foreign countries ［J］. Acta Agriculturae Jiangxi, 2018, 30(2): 87-92.
［8］吕海杰, 杨华, 韩宏宇, 等. 蔬菜播种器发展现状的研究［J］. 农机使用与维修, 2017(10): 1-2.
［9］袁文胜, 吴崇友, 金诚谦. 异形孔窝眼轮式油菜排种器设计与试验［J］. 农业机械学报, 2009, 40(5): 72-75.
Yuan Wensheng, Wu Chongyou, Jin Chengqian, et al. Design and experiment on seedmetering device with special cells for cole seed ［J］. Transactions of the Chinese Society For Agricultural Machinery, 2009, 40(5): 72-75.
［10］张泽平, 马成林, 左春柽. 精播排种器及排种理论研究进展［J］. 吉林工业大学学报, 1995(4): 112-117.
Zhang Zeping, Ma Chenglin, Zuo Chuncheng. The development of the seedmetering device for precision planter and its theoretical study ［J］. Journal of Jilin University of Technology, 1995(4): 112-117.
［11］张宁, 廖庆喜. 我国小粒径种子播种技术与装备的应用与研究进展［J］. 中国农机化, 2012(1): 93-96, 103.
Zhang Ning, Liao Qingxi. Research progress of seeding technology and equipment for small seeds in China ［J］. Chinese Agricultural Mechanization, 2012(1): 93-96, 103.
［12］张宇文. 机械式多功能精密排种器的设计［J］. 农业机械学报, 2005, 36(3): 51-53, 50.
Zhang Yuwen. Research and design for making a new type of mechanized and multiple functions of precision seeddrilled appliance ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2005, 36(3): 51-53, 50.
［13］王英博, 李洪文, 何进, 等. 机械式小麦射播排种器参数优化与试验［J］. 农业工程学报, 2020, 36(21): 1-10.
Wang Yingbo, Li Hongwen, He Jin, et al. Parameters optimization and experiment of mechanical wheat shooting seedmetering device ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2020, 36(21): 1-10.
［14］ Sial F S. Vacuum nozzle design for seed metering ［J］. Transactions of the ASAE, 1984, 27(3): 688-696.
［15］ Maleki M R, Jafari J F, Raufat M H, et al. Evaluation of seed distribution uniformity of a multiflight auger as a grain drill metering device［J］. Biosystems Engineering, 2006, 94(4): 535-543.
［16］ Mandal S, Prasanna Kumar G V, Tanna H, et al. Design and evaluation of a pneumatic metering mechanism for power tiller operated precision planter ［J］. Current Science (Bangalore), 2018, 115(6): 1106.
［17］廖庆喜, 李继波, 覃国良. 气力式油菜精量排种器试验［J］. 农业机械学报, 2009, 40(8): 44-48.
Liao Qingxi, Li Jibo, Qin Guoliang. Experiment of pneumatic precision metering device for rapeseed ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(8): 44-48.
［18］廖庆喜, 李继波, 覃国良. 气力式油菜精量排种器气流场仿真分析［J］. 农业机械学报, 2009, 40(7): 78-82.
Liao Qingxi, Li Jibo, Qin Guoliang. Simulation analysis on air current field of pneumatic precision metering device for rapeseed ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(7): 78-82.
［19］孙延辉. 精量播种对北方玉米生产的技术要求研究［J］. 种子科技, 2018, 36(9): 66,70.
［20］尹文庆, 赵璐, 李骅, 等. 气力槽轮组合式蔬菜精密排种器吸嘴型孔设计与试验［J］. 农业机械学报, 2019, 50(4): 68-76.
Yin Wenqing, Zhao Lu, Li Hua, et al. Design and experiment on suction nozzle type hole of pneumaticsheave combined vegetable precision metering device ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(4): 68-76.
［21］ GB/T6973—2005单粒（精密）播种机试验方法［S］.
［22］ JB/T10293—2001单粒（精密）播种机技术条件［S］.

[1]	刘洋, , 杨善东, 魏忠彩, , 邱田元, , 盖金星, , 胡培杰. 甜菜生产全程机械化技术与装备研究进展[J]. 中国农机化学报, 2022, 43(3): 36-46.
[2]	陈为鹏, 胡培杰, 张宝昌, 邱田元, 杨善东. 交错苗带式大豆免耕精量播种机设计与试验[J]. 中国农机化学报, 2022, 43(2): 1-7.
[3]	Søren Kirkegaard Nielsen, Lars Juhl Munkholm, Mathieu Lamandé, Michael Nørremark, Gareth T.C. Edwards, Ole Green. 播种机精密播种深度控制系统^*[J]. 中国农机化学报, 2021, 42(11): 30-36.
[4]	金文忻;刘永华;张东凤;吴玉娟;王林林;. 大蒜直立种植装置设计与试验[J]. 中国农机化学报, 2020, 41(6): 37-42.
[5]	张建平;申欣;左青松;龚曙光;王树森;. 发动机催化转化器结构优化及CFD模拟[J]. 中国农机化学报, 2020, 41(5): 87-93.
[6]	明哲;何齐胜;黄康永;. 气吸式水稻排种器设计与试验[J]. 中国农机化学报, 2019, 40(6): 11-15.
[7]	龚智强;周智文;赵湛;路玲;. 一种旋转输送气吸振动式精密播种装置结构设计[J]. 中国农机化学报, 2019, 40(2): 1-5.
[8]	张鹏飞;吴鹏鹏;张琦;陈博;奚小波;张剑峰;. 基于带式烘干机的循环风机频率对料层表面风速场分布的模拟及试验[J]. 中国农机化学报, 2019, 40(2): 81-88.