基于灰色关联度的某畜禽车车厢多目标优化

doi:10.13733/j.jcam.issn.2095‑5553.2024.11.021

摘要/Abstract

摘要： 为降低某公司4×2畜禽运输车的生产成本以及提高车辆的燃油经济性，在保证车厢结构性能的前提下，对畜禽车车厢进行轻量化设计。通过对车厢进行静态分析和动态分析，了解其结构性能后，使用混合灵敏度方法从80组设计变量中筛选出30组设计变量，再用哈默斯雷法Hammersley对设计变量进行采样；随后使用移动最小二乘法MLSR创建近似模型，并通过确定系数来判断拟合精度；最后使用多目标遗传算法MOGA对近似模型进行优化并得到帕雷托前沿，并基于灰色关联度分析从该帕雷托前沿中筛选出一组最优板厚。优化后的模型在保证车厢整体结构性能的前提下使车厢减重6.8%，并且一阶模态频率提高2.9 Hz。

关键词: 畜禽车车厢, 近似模型, 多目标优化, 帕雷托前沿, 灰色关联度

Abstract: In order to reduce the production costs and enhance the fuel economy of a company's 4×2 livestock and poultry transport vehicle, on the premise of ensuring the structural performance of the livestock and poultry vehicle, lightweight design of the compartment was carried out. Static and dynamic analysis of the compartment were conducted to understand its structural performance. A mixed sensitivity method was used to select 30 design variables from 80, followed by Hammersley sampling for these variables. An approximate model was created by using mobile least squares regression (MLSR), and its fitting accuracy was determined by the coefficient of determination. The model was optimized by using a multi‑objective genetic algorithm (MOGA) to obtain the Pareto frontier. Based on gray correlation analysis, a set of optimal plate thicknesses was selected from the Pareto frontier. The optimized model resulted in a 6.8% reduction in compartment weight while maintaining overall structural performance, and the first‑order modal frequency increased by 2.9 Hz.

Key words: livestock and poultry vehicle carriage, approximate model, multi?objective optimization, Pareto frontier, grey correlation degree

中图分类号:

U463

赵铁棨, 龚运息, 傅爱军, 张国顺, 张建. 基于灰色关联度的某畜禽车车厢多目标优化[J]. 中国农机化学报, 2024, 45(11): 131-138.

Zhao Tieqi, Gong Yunxi, Fu Aijun, Zhang Guoshun, Zhang Jian. Multi‑objective optimization of a livestock and poultry vehicle carriage based on grey correlation degree[J]. Journal of Chinese Agricultural Mechanization, 2024, 45(11): 131-138.

参考文献

[ 1 ] 张国平, 赵硕, 阿丽玛, 等. 肉羊运输应激及其危害[J]. 家畜生态学报, 2017, 38(12): 83-86.
Zhang Guoping, Zhao Shuo, Alima, et al. Analysis on the transportation stress of mutton sheep and its harm [J]. Acta Ecologiae Animalis Domastici, 2017, 38(12): 83-86.
[ 2 ] 谢虎, 黄雪涛, 韩柏和, 等. 基于拓扑优化的农用运输车辆减振技术研究[J]. 中国农机化学报, 2020, 41(1): 104-108.
Xie Hu, Huang Xuetao, Han Baihe, et al. Vibration reduction technology analysis of agricultural transport vehicle based on topology optimization [J]. Journal of Chinese Agricultural Mechanization, 2020, 41(1): 104-108.
[ 3 ] 张健, 陈科任, 代艳萍. 面向现代农业庄园的电动车车架设计及模态分析[J]. 中国农机化学报, 2019, 40(2): 109-112.
Zhang Jian, Chen Keren, Dai Yanping. Design and modal analysis of electric vehicle frame for modern agricultural manor [J]. Journal of Chinese Agricultural Mechanization, 2019, 40(2): 109-112.
[ 4 ] 郭冬青, 张翠平, 姚晓博, 等. 农用车驱动桥壳的有限元分析与结构改进[J]. 中国农机化学报, 2015, 36(5): 198-202.
Guo Dongqing, Zhang Cuiping, Yao Xiaobo, et al. Finite element analysis and structure improvements of agricultural vehicle driving axle housing [J]. Journal of Chinese Agricultural Mechanization, 2015, 36(5): 198-202.
[ 5 ] 吴鹏兴, 刘夫云, 宋超. 基于NSGA-Ⅱ的隐式参数化白车身轻量化设计[J]. 机械设计, 2022, 39(2): 95-100.
Wu Pengxing, Liu Fuyun, Song Chao. Lightweight design of BIW based on NSGA-II implicit parameterization [J]. Journal of Machine Design, 2022, 39(2): 95-100.
[ 6 ] 何睿. 基于多学科多目标的车架结构轻量化设计[J]. 噪声与振动控制, 2022, 42(2): 173-178.
He Rui. Lightweight design of frame structures based on multi‑discipline and multi‑objective [J]. Noise and Vibration Control, 2022, 42(2): 173-178.
[ 7 ] Choi M J, Cho S. Isogeometric configuration design sensitivity analysis of geometrically exact shear‑deformable beam structures [J]. Computer Methods in Applied Mechanics and Engineering, 2019, 351: 153-183.
[ 8 ] 康满, 陆静. 基于灵敏度分析的车门轻量化研究[J]. 科学技术与工程, 2016, 16(36): 76-80.
Kang Man, Lu Jing. Research on the lightweight of car door based on sensitivity analysis [J]. Science Technology and Engineering, 2016, 16(36): 76-80.
[ 9 ] 王震虎, 周巧英, 刘开勇, 等. 基于响应面模型的白车身多目标轻量化设计[J]. 中国机械工程, 2018, 29(1): 75-81.
Wang Zhenhu, Zhou Qiaoying, Liu Kaiyong, et al. Multi‑object lightweight design of BIWs based on response surface model [J]. China Mechanical Engineering, 2018, 29(1): 75-81.
[10] 周松, 高翔, 张志, 等. 基于相对灵敏度的重型自卸车结构轻量化设计[J]. 科学技术与工程, 2021, 21(35): 15027-15034.
Zhou Song, Gao Xiang, Zhang Zhi, et al. Lightweight design of dump truck structure based on relative sensitivity analysis [J]. Science Technology and Engineering, 2021, 21(35): 15027-15034.
[11] 赵树恩, 杨明森, 彭光旭. 基于NSGA-II混合灵敏度分析的白车身轻量化优化设计[J]. 机械强度, 2019, 41(4): 887-894.
[12] 万强, 阮景奎. 基于混合灵敏度分析的某自卸车车厢结构优化设计[J]. 科学技术与工程, 2020, 20(12): 4954-4961.
Wan Qiang, Ruan Jingkui. Optimization design of dump truck structure based on mixed sensitivity analysis [J]. Science Technology and Engineering, 2020, 20(12): 4954-4961.
[13] 刘锋, 张瑞乾, 陈勇. 基于模态和刚度的车门轻量化研究[J]. 机械强度, 2021, 43(2): 476-481.
[14] 李军, 冷川. 基于RBF神经网络模型的车门多目标轻量化设计[J]. 重庆交通大学学报(自然科学版), 2019, 38(11): 127-132.
[15] Jiang R, Ci S, Liu D, et al. A hybrid multi‑objective optimization method based on NSGA-II algorithm and entropy weighted TOPSIS for lightweight design of dump truck carriage [J]. Machines, 2021, 9(8): 156.
[16] 宋超, 匡兵, 刘夫云, 等. 基于灵敏度分析的商用车驾驶室白车身轻量化设计[J]. 现代制造工程, 2021(3): 46-51, 126.
Song Chao, Kuang Bing, Liu Fuyun, et al. Lightweight design of commercial vehicle cab body‑in‑white based on sensitivity analysis [J]. Modern Manufacturing Engineering, 2021(3): 46-51, 126.
[17] 邢志波, 谭继锦, 汪小朋, 等. 多目标优化下汽车车门性能分析研究[J]. 合肥工业大学学报(自然科学版), 2017, 40(7): 888-891.
[18] Wang D, Jiang R, Wu Y. A hybrid method of modified NSGA-II and TOPSIS for lightweight design of parameterized passenger car sub‑frame [J]. Journal of Mechanical Science and Technology, 2016, 30(11): 4909-4917.
[19] 任明, 孙涛, 石永金, 等. 基于Kriging近似模型的车架轻量化优化[J]. 机械强度, 2019, 41(6): 1372-1377.
[20] 王登峰, 李慎华. 基于Pareto挖掘的白车身侧碰安全件轻量化优化设计[J]. 中国机械工程, 2021, 32(13): 1584-1590, 1637.
[21] 蒋荣超, 刘大维, 王登峰. 基于熵权TOPSIS方法的整车动力学性能多目标优化[J]. 机械工程学报, 2018, 54(2): 150-158.

[1]	孟源, 闫飞. 基于多目标分析的F-T柴油机SOOT和NOX排放物优化研究[J]. 中国农机化学报, 2024, 45(11): 119-124.
[2]	郭亚倩, 张璠, 姚竟发, 常淑惠, 孟宇, 于春辉. 带时间窗的多目标农机跨区协同作业调度方法研究[J]. 中国农机化学报, 2024, 45(10): 184-192.
[3]	谭芸颖, 李青涛, 梁丽, 刘圣桢, 王霜. 特性参数连续可变复合传动的优化与选型[J]. 中国农机化学报, 2024, 45(1): 130-137.
[4]	侯占峰, 马学杰, 薛晶, 戴念祖, 刘敏. 红三叶种子丸粒化工作参数多目标优化[J]. 中国农机化学报, 2023, 44(5): 115-120.
[5]	邱绪云, 刘佳奇, 高琦, 宋裕民, 冯雪健. 基于Kriging近似模型的果园作业机车架结构参数优化设计[J]. 中国农机化学报, 2023, 44(11): 93-101.
[6]	徐萌, 王俊, 文奕钧, 史志鹏, 王坤. 小型农用柴油机油耗和排放的多目标优化[J]. 中国农机化学报, 2022, 43(2): 112-120.
[7]	李慧霜, 马月虹, 曹新伟. 手扶式移栽机栽植机构优化设计与试验[J]. 中国农机化学报, 2022, 43(11): 24-31.
[8]	陈平录;许静;翟因敏;徐萌;刘木华;. 立式微耕机减速器结构参数多目标优化研究[J]. 中国农机化学报, 2019, 40(5): 1-4.