4LZ-4.0谷物联合收获机油菜割台设计与试验

doi:10.13733/j.jcam.issn.2095-5553.2023.09.004

摘要/Abstract

摘要： 油菜收获期植株高大、分枝牵连、易炸荚，机械化收获损失大。为减少联合收割机油菜收获损失，通过加长450mm割台、安装1 150mm双动刀半刀距行程竖侧切割器、调整拨禾轮中心位置、降低拨禾轮转速至12~21r/min、加高400mm侧后围挡等方法，改进设计4LZ-4.0谷物联合收获机油菜割台。对样机进行三种油菜种植模式的田间收获损失试验，试验结果表明，油菜割台损失率为4.44%，总损失率为6.60%(<8.00%)，分别较改进前降低45%和36%。本设计对油菜割台收获损失降低有一定的生产实践参考价值。

关键词: 联合收获机, 油菜, 割台, 损失率, 收获机械

Abstract: Rape plant is high and large with branches implicated, fried pods, large mechanized harvesting loss in harvest period. In order to reduce the rape harvest loss of combine harvester, the rape cutter of 4LZ-4.0 grain combine harvester was redesigned by lengthening the cutter 450mm, installing 1150mm doubleacting cutter halfdistance stroke vertical side cutting knife, adjusting the reel wheel center position, reducing reel wheel speed to 12-21r/min, heightening 400mm side rear wall and other methods. The field harvest loss comparative experiment of three rape planting modes were carried out on the prototype, the results showed that the rape cutter loss rate was 4.44%, the total loss rate was 6.60% (<8.00%), 45% and 36% lower than before improvement respectively. It has proved that the design has certain production practice reference value for the harvester rape cutter loss rate.

Key words: combine harvester, rape, cutter, loss rate, harvesting machinery

中图分类号:

S225.3

周玉姣, 罗斌, 刘定炜, 刘丹, 邱瑜, 周扬. 4LZ-4.0谷物联合收获机油菜割台设计与试验[J]. 中国农机化学报, 2023, 44(9): 22-27.

Zhou Yujiao, Luo Bin, Liu Dingwei, Liu Dan, Qiu Yu, Zhou Yang. Design and experiment of rape cutter in 4LZ-4.0 grain combine harvester[J]. Journal of Chinese Agricultural Mechanization, 2023, 44(9): 22-27.

参考文献

［1］　吴崇友. 油菜机械化收获技术［M］. 镇江: 江苏大学出版社, 2017.
［2］　王金双, 熊永森, 徐中伟, 等. 纵轴流联合收获机关键部件改进设计与试验［J］. 农业工程学报, 2017, 33(10): 25-31.
Wang Jinshuang, Xiong Yongsen, Xu Zhongwei, et al. Improved design and test of key components for longitudianl axial flow combine harvester ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2017, 33(10): 25-31.
［3］　廖庆喜, 徐阳, 袁佳诚, 等. 油菜联合收获机切抛组合式纵轴流脱离装置设计与试验［J］. 农业机械学报, 2019, 50(7): 140-150.
Liao Qingxi, Xu Yang, Yuan Jiacheng, et al. Design and experiment on combined cutting and throwing longitudinal axial flow threshing and separating device of rape combine harvester ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(7): 140-150.
［4］　万星宇, 舒彩霞, 徐阳, 等. 油菜联合收获机分离清选差速圆筒筛设计与试验［J］. 农业工程学报, 2018, 34(14): 27-35.
Wan Xingyu, Shu Caixia, Xu Yang, et al. Design and experiment on cylinder sieve with different rotational speed in cleaning system for rape combine harvester ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2018, 34(14): 27-35.
［5］　张敏, 金诚谦. 风筛选式油菜联合收割机清选机构参数优化与试验［J］. 农业工程学报, 2015, 31(24): 8-15.
Zhang Min, Jin Chengqian. Parameter optimization and experiment on airscreen cleaning device of rapeseed combine harvester ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31(24): 8-15.
［6］　廖庆喜, 王昌, 何坤, 等. 油菜联合收获后含杂油菜籽复清机设计与试验［J］. 农业机械学报, 2021, 52(10): 175-185, 232.
Liao Qingxi, Wang Chang, He Kun, et al. Design and experiment on recleaning machine for rapeseed after combine harvesting ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2021, 52(10): 175-185, 232.
［7］　王进红, 吴鹏辉, 唐舟, 等. 江西省丘陵地区小型油菜联合收割机设计与试验［J］. 江西农业, 2019(24): 81-82.
［8］　柴晓玉, 徐立章, 严超, 等. 油菜割台竖割刀切割频率随动调节装置设计与试验［J］. 农业机械学报, 2018, 49(12): 93-99.
Chai Xiaoyu, Xu Lizhang, Yan Chao, et al. Design and test of cutting frequency followup adjusting device for vertical cutting knife of rapeseed cutting machine ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2018, 49(12): 93-99.
［9］　黄小毛, 查显涛, 宗望远, 等. 油菜联合收获割台落粒横流气压收集装置设计与试验［J］. 农业机械学报, 2016, 47(S1): 227-233.
Huang Xiaomao, Zha Xiantao, Zong Wangyuan, et al. Design and test of transverse positive pressure airflow collection device for header losses of rape combine harvester ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(S1): 227-233.
［10］　刘征明, 梅林森, 黄榕琳, 等. 四川丘陵地区油菜联合收割机设计与试验研究［J］. 中国农机化学报, 2017, 38(1): 11-14, 36.
Liu Zhengming, Mei Linsen, Huang Ronglin, et al. Design and experimental research of rape combine harvester for hilly area in Sichuan province ［J］. Journal of Chinese Agricultural Mechanization, 2017, 38(1): 11-14, 36.

[1]	曾功俊, 陈建能, 夏旭东, 叶军, 何也能. 基于响应面法的拉拽式胡萝卜根茎分离试验研究[J]. 中国农机化学报, 2023, 44(9): 1-8.
[2]	吴家安, 李向军, 高明宇, 常传义, 刘恩宏. 板蓝根收获机挖掘装置设计与有限元分析[J]. 中国农机化学报, 2023, 44(9): 16-21.
[3]	郑航, 傅童, 薛向磊, 叶云翔, 俞国红. 茶叶机械化采摘技术研究现状与展望[J]. 中国农机化学报, 2023, 44(9): 28-35.
[4]	侯义锋, , 钱俊, , 王梁, 贺杰, 闭耀锋. 砂糖橘采摘机器人分拣机构设计[J]. 中国农机化学报, 2023, 44(9): 183-189.
[5]	王大明, 何逸霏, 李华英, 苟于江, 何辉波. 柑橘采摘机器人图像识别算法研究[J]. 中国农机化学报, 2023, 44(9): 222-226.
[6]	姚帅, 薛臻, 缪磊, 谭俊, 黄毅成, 赵湛. 拔取式白萝卜联合收获机研制与试验[J]. 中国农机化学报, 2023, 44(8): 27-33.
[7]	王涛, 闫小丽, 米国鹏, 刘溯源, 张振国, 刘正道. 硬质茎秆切割装置研究现状[J]. 中国农机化学报, 2023, 44(8): 34-39.
[8]	刘岗微, 倪有亮, 杨腾祥, 齐彦栋, 金诚谦. 大豆收获机割台高度自动控制系统设计与试验[J]. 中国农机化学报, 2023, 44(6): 155-160.
[9]	王鹏, 金诚谦, , 王超, 李盼盼, 赵紫皓. 谷物联合收获机脱粒系统研究现状[J]. 中国农机化学报, 2023, 44(5): 48-57.
[10]	刘士坤, , 金诚谦, 陈满, 杨腾祥, 徐金山. 基于DeepLabV3+网络的机收大豆破碎率在线检测方法[J]. 中国农机化学报, 2023, 44(5): 170-175.
[11]	吴传云, 冯健, 吴俊, 李丹阳, 李曦, 舒娟, 王康军. 油菜移栽机作业效果综合测评[J]. 中国农机化学报, 2023, 44(3): 1-5.
[12]	赵男, 金诚谦, 王超, 唐小涵, 郭榛. 谷物联合收获机清选系统智能化技术研究进展[J]. 中国农机化学报, 2023, 44(3): 163-170.
[13]	徐慧群, 李阳, 张建军. 冬枣果实特性及机械化采摘现状研究[J]. 中国农机化学报, 2023, 44(2): 53-59.
[14]	冯健, 李丹阳, 吴传云, 朱路阳, 卢灿炯, 宋承琦, 杜铮. 油菜籽联合收获机作业效果综合测评[J]. 中国农机化学报, 2023, 44(1): 65-68.
[15]	欧阳蕾, 李维华, 焦伟, 吴东辉, 侯加林, . 我国山药机械化收获技术研究进展[J]. 中国农机化学报, 2023, 44(1): 93-99.