基于CFD的茶叶理条部件试验与优化#br#

	#br#

doi:10.13733/j.jcam.issn.2095-5553.2022.10.013

摘要/Abstract

摘要： 针对茶叶理条机锅槽温度均匀性差的问题，采用计算流体力学(CFD)建立理条部件的温度场仿真模型。运用PT100温度传感器测量理条部件作业时中间平面的温度并与仿真结果进行对比，实测温度与相对应的仿真温度最大相对误差为12.1 ℃，平均相对误差为9.5 ℃，最大绝对误差为5.9%，平均绝对误差为4.67%，说明采用该模型对理条部件的温度场进行模拟是可行的。运用该模型对理条部件进行优化设计，结果表明：当采用环形电阻丝按照125 mm、105 mm、85 mm、65 mm的间距梯度布置时，理条部件中间平面的温度均匀性系数从0.847增加到0.935，温度均匀性增加了104%，为进一步提高理条部件的温度均匀性提供了思路。

关键词: 理条机, 锅槽, CFD, 温度场, 均匀性

Abstract: We established the temperature field model of tea slitting parts in view of the poor uniformity of the temperature in pot sink of tea slitter by using Computer Fluent Dynamic (CFD). We measured the operating temperature of tea slitting parts by using PT100 temperature sensor and compared it with the temperature at the same position in the temperature field model. The relative maximum error between measured temperature and simulated temperature was 12.1 ℃, the relative average error was 9.5 ℃, the absolute maximum error was 5.9% and the absolute average error was 4.67%, which showed that it was feasible to use the model to simulate the temperature field of slitting parts. And we used this model to optimize the design of slitting parts. The temperature uniformity coefficient of the midplane of slitting parts increased from 0.847 to 0.935 and the temperature uniformity increased by 10.4% when the ring resistance wire was arranged according to the interval gradient of 125 mm, 105 mm, 85 mm and 65 mm, which provided a way to further improve the temperature uniformity of slitting parts.

Key words: slitting machine, pot sink, CFD, temperature field, uniformity

中图分类号:

S226.9

王攀, 易文裕, 程方平, 王春霞, 周彦君, 邓佳. 基于CFD的茶叶理条部件试验与优化#br#

#br#

[J]. 中国农机化学报, 2022, 43(10): 86-91.

Wang Pan, Yi Wenyu, Cheng Fangping, Wang Chunxia, Zhou Yanjun, Deng Jia.. Experiment and optimization of tea slitting parts based on CFD[J]. Journal of Chinese Agricultural Mechanization, 2022, 43(10): 86-91.

参考文献

［1］　
柏宣丙, 李兵, 邓虎啸. 我国绿茶做形装备的研究进展［J］. 中国茶叶加工, 2021(2): 5-11.

Bai Xuanbing, Li Bing, Deng Huxiao. Research progress of green tea shaping equipment in China ［J］. China Tea Processing, 2021(2): 5-11.

［2］　
陈根生, 袁海波, 许勇泉, 等. 针芽形绿茶连续化生产线设计与工艺参数优化［J］. 茶叶科学, 2016, 36(2): 139-148.

Chen Gensheng, Yuan Haibo, Xu Yongquan, et al. Design and process optimization of a continuous production line on needletype premium green tea ［J］. Journal of Tea Science, 2016, 36(2): 139-148.

［3］　
王小勇, 李兵, 曾晨, 等. 基于模糊算法的茶叶理条机温度控制设计［J］. 茶叶科学, 2015, 35(4): 363-369.

Wang Xiaoyong, Li Bing, Zeng Chen, et al. the temperature design of tea carding machine based on fuzzy controler ［J］. Journal of Tea Science, 2015, 35(4): 363-369.

［4］　
师大亮, 余继忠, 刘晓红, 等. 不同工艺、不同辉锅方式对龙井茶品质的影响研究［J］. 西南师范大学学报(自然科学版), 2010, 35(5): 173-177.

Shi Daliang, Yu Jizhong, Liu Xiaohong, et al. Influences of different roasting processes in different technologies on the quality of Longjing tea ［J］. Journal of Southwest China Normal University (Natural Science Edition), 2010, 35(5): 173-177.

［5］　
程方平, 易文裕, 庹洪章, 等. 茶叶理条机械研究现状与发展趋势［J］. 中国农机化学报, 2019, 40(5): 69-74.

Cheng Fangping, Yi Wenyu, Tuo Hongzhang, et al. Research status and development trend of tea carding machinery ［J］. Journal of Chinese Agricultural Mechanization, 2019, 40(5): 69-74.

［6］　
罗红玉, 吴全, 钟应富, 等. 变温变频理条工艺对针形茶品质的影响［J］. 食品科学, 2018, 39(13): 119-124.

Luo Hongyu, Wu Quan, Zhong Yingfu, et al. Effects of shaping at variable temperatures and variable frequencies on quality of needleshaped green tea ［J］. Food Science, 2018, 39(13): 119-124.

［7］　
李鑫磊, 林宏政, 俞少娟, 等. 功夫红茶加工技术与设备研究进展［J］. 中国农机化学报, 2015, 36(6): 338-344.

Li Xinlei, Lin Hongzheng, Yu Shaojuan, et al. Research advance on congou black tea processing technology and equipment ［J］. Journal of Chinese Agricultural Mechanization, 2015, 36(6): 338-344.

［8］　
刘飞, 王云, 李春华, 等. 茶叶干燥技术研究现状及展望［J］. 中国农学通报, 2015, 31(6): 210-215.

Liu Fei, Wang Yun, Li Chunhua, et al. Rescarch status and prospect of tea drying technology ［J］. Chinese Agricultural Science Bulletin, 2015, 31(6): 210-215.

［9］　
邓雪. 三种理条机加热装置改进的研究［D］. 合肥: 安徽农业大学, 2016.

Deng Xue. Study on the optimization of the heating devices of three types of teas shaping machines ［D］. Hefei: Anhui Agricultural University, 2016.

［10］　
王攀, 熊昌国, 易文裕, 等. 基于CFD的食用菌热风干燥装置的研究［J］. 包装与食品机械, 2019, 37(6): 42-45.

Wang Pan, Xiong Changguo, Yi Wenyu, et al. Research on CFD-based hot air drying equipment for edible fungi ［J］. Packaging and Food Machinery, 2019, 37(6): 42-45.

［11］　
肖雪鹏, 程曼, 袁洪波, 等. 基于插值方法的温室温度场可视化仿真分析［J］. 中国农机化学报, 2021, 42(1): 75-84.

Xiao Xuepeng, Cheng Man, Yuan Hongbo, et al. Visual simulation analysis of greenhouse temperature field based on interpolation method ［J］. Journal of Chinese Agricultural Mechanization, 2021, 42(1): 75-84.

［12］　
李奇, 何仁财, 邱璐. 基于CFD烘干平板传热模拟分析［J］. 中国农机化学报, 2013, 34(6): 129-133.

Li Qi, He Rencai, Qiu Lu. Simulation to heat transfer of flat plate drying based on CFD ［J］. Journal of Chinese Agricultural Mechanization, 2013, 34(6): 129-133.

［13］　
罗权权, 李保国, 袁成豪. 基于CFD的干燥室气流优化研究［J］. 包装与食品机械, 2018, 36(5): 27-32.

Luo Quanquan, Li Baoguo, Yuan Chenghao. Optimization of airflow in drying chamber based on CFD ［J］. Packaging and Food Machinery, 2018, 36(5): 27-32.

［14］　
景亮, 沈敏. 出菇房气流流场和温度场CFD模拟与验证［J］. 中国农机化学报, 2016, 37(6): 84-88.

Jing Liang, Shen Min. CFD simulation and verification of flow and temperature fields in mushroom house ［J］. Journal of Chinese Agricultural Mechanization, 2016, 37(6): 84-88.

［15］　
Wu Z H, Mujumdar A S. CFD model in of the gasparticle flow behavior in spouted bed ［J］. Powder Technology, 2007, 183(2): 260-272.

［16］　
朱文颖, 史策, 韩帅, 等. 基于CFD的苹果隔板包装预冷温度场研究［J］. 农业机械学报, 2019, 50(1): 331-338.

Zhu Wenying, Shi Ce, Han Shuai, et al. Investigation on precooling temperature field in partition packaging based on CFD ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(1): 331-338.

［17］　
Piscia D, Munoz P, Panades C, et al. A method of coupling CFD and energy balance simulations to study humidity control in unheated greenhouses ［J］. Computers and Electronics in Agriculture, 2015, 115: 129-141.

［18］　
Chen J, Xu F, Tan D, et al. A control method for agricultural greenhouses heating based on computational fluid dynamics and energy prediction model ［J］. Applied Energy, 20151, 141: 106-118.

［19］　
赵训友, 林景松, 童晓艳. 基于Richardson外推法的CFD中离散不确定度估计［J］. 系统仿真学报, 2014, 26(10): 2315-2320.

Zhao Xunyou, Lin Jingsong, Tong Xiaoyan. Discretization uncertainty estimation in CFD based on Richardson extrapolation method ［J］. Journal of System Simulation, 2014, 26(10): 2315-2320.

［20］　
Ariara G C P O, Arthanareeswaren G, Varadarajan K N, et al. CFD study on pressure drop and uniformity index of three cylinder LCV exhaust system ［J］. Procedia Engineering, 2015, 127: 1211-1218.

[1]	徐陶, 吕晓兰, , 祁雁楠, 曾锦, 雷哓晖, 袁全春. 我国果园风送式喷雾装备与技术研究进展[J]. 中国农机化学报, 2023, 44(7): 69-77.
[2]	漆海霞, 邹军, 苗秋实, 黄桂珍, 陈宇, 兰玉彬, . 多旋翼无人机不同作业参数对花生冠层雾滴沉积分布特性的影响[J]. 中国农机化学报, 2023, 44(4): 57-64.
[3]	房开拓, 邱威, 周良富. 基于模型与CFD辅助的射流式混药器设计[J]. 中国农机化学报, 2023, 44(4): 65-70.
[4]	钱睿, 吴达科, 杨明金. 基于Fluent的棉花烘房流场均匀性优化[J]. 中国农机化学报, 2023, 44(1): 152-161.
[5]	夏晶晶, 林诗涛, 王飞仁, 王广海, 黄远广, 郭嘉明, . 基于PIV可视化的蓄冷板外围流场优化研究[J]. 中国农机化学报, 2022, 43(5): 127-133.
[6]	杜华兴, 李久熙, 李丽华. 基于EDEM的平养育雏喂料装置设计与试验[J]. 中国农机化学报, 2022, 43(2): 60-66.
[7]	闫建伟, 胡冬军, 刘启合, 喻丽华, 牛素贞, . 茶叶理条技术及机械研究进展[J]. 中国农机化学报, 2022, 43(2): 75-83.
[8]	邢凯, 高晓宏, 戴晓军, 王强, 张平, 周海燕. 基于DEMCFD耦合的气力式播种机分配器数值模拟与试验[J]. 中国农机化学报, 2022, 43(1): 39-46.
[9]	曹先洪, 杨振杰, 张慕天, 余杨, . 卧式植保混药机设计及其混合均匀性模拟研究[J]. 中国农机化学报, 2021, 42(8): 67-73.
[10]	吉旭;吴荻;林蜀云;唐勇;张太华;徐卫平;. 基于贵州猕猴桃花粉机械分离的冷冻方法研究[J]. 中国农机化学报, 2021, 42(6): 79-85.
[11]	徐效伟, 赵裕祥, 曹玉发, 颜建春, 魏海, 谢焕雄. 混流干燥机研究现状与展望[J]. 中国农机化学报, 2021, 42(12): 95-100.
[12]	王欲进, 潘思意. 插装阀阀芯优化与仿真分析[J]. 中国农机化学报, 2021, 42(12): 137-143.
[13]	张紫恒, 张吉军, 唐正, 曹龙奎, 衣淑娟, 陈嘉睿. 北方粳高粱微波干燥特性试验与仿真分析^*[J]. 中国农机化学报, 2021, 42(11): 65-71.
[14]	王朕;黄浩;易应武;姜思思;蔡克桐;朱安林;. 小型油菜联合收割机吹禾气流管道结构优化设计与试验[J]. 中国农机化学报, 2020, 41(9): 16-24.
[15]	于福锋;李平;张凤奎;张宏;李忠杰;范修文;. 红枣悬浮速度测定装置设计与试验[J]. 中国农机化学报, 2020, 41(9): 89-94.

基于CFD的茶叶理条部件试验与优化#br#
#br#

Experiment and optimization of tea slitting parts based on CFD

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价